Burner Group (Extender) - Remove - CWF1-UP
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
ZZ     | 6V-9507     | Face Seal Plug (9/16 - 18 THD)     | 1     |
6V-9828 | Cap Assembly (9/16 - 18 THD)     | 1     |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations. |
- Extend the extender.
- Remove bolts (1) and cover (2) .
Show/hide table
Illustration 1 | g00792083 |
- Disconnect harness assembly (6) from burner group (5) and disconnect harness assemblies (3) .
Show/hide table
Illustration 2 | g00890164 |
- Disconnect hose assembly (4) .
- Remove bolts (7) and remove burner group (5) from the extender.
Caterpillar Information System:
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Remove - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Blower Motor - Remove and Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Glow Plug - Remove and Install - CWF1-UP
16H Motor Grader Power Train Transmission and Transfer Gears - Remove
AS2251 and AS2301 Screeds Extender Carriage
Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258} Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258}
12M Motor Grader Fuel System - Prime
12M Motor Grader Fuel System - Fill
16H Motor Grader Power Train Transmission Control Valve - Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Drag Conveyor) - Remove and Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Auger Conveyor) - Remove and Install
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Group (Extender) - Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Gerotor Motor (Vibratory - Main) - Remove - CWF1-UP
533 and 543 Wheel Feller Bunchers Monitoring System
Assembly Procedure For the 785B and 785C Dual Slope Truck Body{7258, 7960} Assembly Procedure For the 785B and 785C Dual Slope Truck Body{7258, 7960}
AS2251 and AS2301 Front Mounted Screed Gerotor Motor (Vibratory - Main) - Install - CWF1-UP
16H Motor Grader Power Train Transmission and Transfer Gears - Install
AS2251 and AS2301 Front Mounted Screed Vibratory Group (Main) - Remove - CWF1-UP
AS2251 and AS2301 Screeds Deflector (Strike-Off)
AS2251 and AS2301 Front Mounted Screed Vibratory Group (Main) - Install - AWC1-UP
AS2251 and AS2301 Front Mounted Screed Extender Carriage - Disassemble - CWF1-UP
8-16B and 10-20B Extend-A-Mat Screed Power Adjuster Motor Group (Sloper) - Remove