Burner Group (Extender) - Install - CWF1-UP
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| ZZ | 6V-9507 | Face Seal Plug (9/16 - 18 THD) | 1 |
| 6V-9829 | Cap Assembly (9/16 - 18 THD) | 1 | |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
- Install burner group (5) and bolts (7) .
Show/hide table
 | |
| Illustration 1 | g00890164 |
- Connect hose assembly (4) .
- Install harness assembly (6) on burner group (5) and install harness assemblies (3) .
- Install cover (2) and bolts (1) .
Show/hide table
 | |
| Illustration 2 | g00792083 |
Caterpillar Information System:
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Group (Extender) - Remove - CWF1-UP
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Remove - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Blower Motor - Remove and Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Glow Plug - Remove and Install - CWF1-UP
16H Motor Grader Power Train Transmission and Transfer Gears - Remove
AS2251 and AS2301 Screeds Extender Carriage
Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258} Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258}
12M Motor Grader Fuel System - Prime
12M Motor Grader Fuel System - Fill
16H Motor Grader Power Train Transmission Control Valve - Install
AS2251 and AS2301 Front Mounted Screed Gerotor Motor (Vibratory - Main) - Remove - CWF1-UP
533 and 543 Wheel Feller Bunchers Monitoring System
Assembly Procedure For the 785B and 785C Dual Slope Truck Body{7258, 7960} Assembly Procedure For the 785B and 785C Dual Slope Truck Body{7258, 7960}
AS2251 and AS2301 Front Mounted Screed Gerotor Motor (Vibratory - Main) - Install - CWF1-UP
16H Motor Grader Power Train Transmission and Transfer Gears - Install
AS2251 and AS2301 Front Mounted Screed Vibratory Group (Main) - Remove - CWF1-UP
AS2251 and AS2301 Screeds Deflector (Strike-Off)
AS2251 and AS2301 Front Mounted Screed Vibratory Group (Main) - Install - AWC1-UP
AS2251 and AS2301 Front Mounted Screed Extender Carriage - Disassemble - CWF1-UP
8-16B and 10-20B Extend-A-Mat Screed Power Adjuster Motor Group (Sloper) - Remove
AS2251 and AS2301 Front Mounted Screed Extender Carriage - Assemble - CWF1-UP
8-16B and 10-20B Extend-A-Mat Screed Power Adjuster Motor Group (Sloper) - Install