Burner Blower Motor - Remove and Install - CWF1-UP
Removal Procedure
- Extend the extender. Remove bolts (1) and cover (2) .
Show/hide table
Illustration 1 | g00792083 |
Note: Use Step 1 in order to remove the burner blower motor from the extender.
- Disconnect harness assembly (3) .
Show/hide table
Illustration 2 | g00890056 |
- Remove bolts (5) and burner blower motor (4) .
- Remove screws (6) and screen (7) .
Show/hide table
Illustration 3 | g00890058 |
- Loosen set screw (8) and remove blower wheel (9) .
Show/hide table
Illustration 4 | g00792344 |
- Remove bolts (10) and plate (11) .
- Remove screws (12) and remove the burner blower motor from housing (13) .
Show/hide table
Illustration 5 | g00792345 |
Installation Procedure
- Install the burner blower motor in housing (13) and install screws (12) .
Show/hide table
Illustration 6 | g00792345 |
- Install blower wheel (9) and tighten set screw (8) .
Show/hide table
Illustration 7 | g00792344 |
- Install plate (11) and bolts (10) .
- Install screen (7) and screws (6) .
Show/hide table
Illustration 8 | g00890058 |
- Install burner blower motor (4) and bolts (5) .
Show/hide table
Illustration 9 | g00890056 |
- Connect harness assembly (3) .
- Install cover (2) and bolts (1). Retract the extender.
Show/hide table
Illustration 10 | g00792083 |
Note: Use Step 7 only if the blower motor has been removed from the extender.
Caterpillar Information System:
AS2251 and AS2301 Front Mounted Screed Glow Plug - Remove and Install - CWF1-UP
16H Motor Grader Power Train Transmission and Transfer Gears - Remove
AS2251 and AS2301 Screeds Extender Carriage
Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258} Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258}
12M Motor Grader Fuel System - Prime
12M Motor Grader Fuel System - Fill
16H Motor Grader Power Train Transmission Control Valve - Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Drag Conveyor) - Remove and Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Auger Conveyor) - Remove and Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Reference Material
AS2251 and AS2301 Front Mounted Screed Screed Plate (Main) - Remove and Install - CWF1-UP
16H Motor Grader Power Train Transmission Control Valve - Remove
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Remove - CWF1-UP
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
AS2251 and AS2301 Front Mounted Screed Burner Group (Extender) - Remove - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Group (Extender) - Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Gerotor Motor (Vibratory - Main) - Remove - CWF1-UP
533 and 543 Wheel Feller Bunchers Monitoring System
Assembly Procedure For the 785B and 785C Dual Slope Truck Body{7258, 7960} Assembly Procedure For the 785B and 785C Dual Slope Truck Body{7258, 7960}
AS2251 and AS2301 Front Mounted Screed Gerotor Motor (Vibratory - Main) - Install - CWF1-UP
16H Motor Grader Power Train Transmission and Transfer Gears - Install
AS2251 and AS2301 Front Mounted Screed Vibratory Group (Main) - Remove - CWF1-UP
AS2251 and AS2301 Screeds Deflector (Strike-Off)