Chain (Auger Conveyor) - Remove and Install
Start By:
- Remove the screed. Refer to Disassembly and Assembly, "Screed - Remove and Install".
- Loosen bolts (2). Turn nut (1) counterclockwise in order to relieve the tension on the chain.
- Remove bolts (3), guards (5), and plate (4).
Show/hide table
Illustration 2 g00776128 - Remove cotter pins (6), side bar (7), and connecting link (8). Remove chain (9) from the sprockets and from the support assembly.
Show/hide table
Illustration 1 | g01068702 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 4C-9502 | Gasket Sealant | 1 |
- Position chain (9) around the sprockets. Bring the ends of chain (9) together and install connecting link (8). Install side bar (7) and cotter pins (6).
Show/hide table
Illustration 4 g01068702 - Apply Tooling (A) to plate (4). Install plate (4), guards (5), and bolts (3).
- Turn nut (1) clockwise in order to adjust the tension on the chain. Refer to Operation and Maintenance Manual, "Conveyor Drive Chains (Auger) - Adjust" for the correct procedure. Tighten bolts (2).
Show/hide table
Illustration 3 | g00776128 |
End By:
- Install the screed. Refer to Disassembly and Assembly, "Screed - Remove and Install".
Caterpillar Information System:
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Reference Material
AS2251 and AS2301 Front Mounted Screed Screed Plate (Main) - Remove and Install - CWF1-UP
16H Motor Grader Power Train Transmission Control Valve - Remove
CB-214E, CB-224E and CB-225E Vibratory Compactors Propel System Electrical Schematic
AS2251 and AS2301 Screeds Hydraulic Cylinder (Extender Extend) - AS-2301
AP-655C and BG-2255C Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Install
120M and 12M Motor Graders Cooling System Coolant Level - Check
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Hydraulic Pedal Control
16H Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Install
254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP Load Haul Dump{1408, 4250} 254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP Load Haul Dump{1408, 4250}
R2900G Load Haul Dump Power Train Gear Pump (Transmission Charging) - Assemble
AS2251 and AS2301 Screeds Hydraulic Cylinder (Extender Extend) - AS-2251
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Drag Conveyor) - Remove and Install
16H Motor Grader Power Train Transmission Control Valve - Install
12M Motor Grader Fuel System - Fill
12M Motor Grader Fuel System - Prime
Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258} Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258}
AS2251 and AS2301 Screeds Extender Carriage
16H Motor Grader Power Train Transmission and Transfer Gears - Remove
AS2251 and AS2301 Front Mounted Screed Glow Plug - Remove and Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Blower Motor - Remove and Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Remove - CWF1-UP
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
AS2251 and AS2301 Front Mounted Screed Burner Group (Extender) - Remove - CWF1-UP