Extender Carriage
Show/hide table
Illustration 1 | g01068592 |
(1) Apply 9S-3263 Thread Lock Compound to the twenty-four 8T-8917 Bolts.
(2) Apply 9S-3263 Thread Lock Compound to the four 5S-2389 Bolts.
(3) Apply 4C-5593 Anti-Seize Compound and tighten the inboard 8I-0184 Adjustment Nut to the following torque. ... 150 ± 10 N·m (110 ± 7 lb ft)
(3) Apply 4C-5593 Anti-Seize Compound and tighten the remaining two 8I-0184 Adjustment Nuts to the following torque. ... 30 ± 10 N·m (22 ± 7 lb ft)
(4) Tighten the six 1A-4168 Nuts to the following torque. ... 200 ± 40 N·m (150 ± 30 lb ft)
(5) Apply 7X-7699 Lubricating Grease to the wear plates. There are four wear plates on each extender.
(6) Apply 9S-3263 Thread Lock Compound to the twenty-four 8T-9389 Bolts.
Caterpillar Information System:
Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258} Installation of Extensions on the Body for the Ejector Blade{6060, 6203, 7250, 7258}
12M Motor Grader Fuel System - Prime
12M Motor Grader Fuel System - Fill
16H Motor Grader Power Train Transmission Control Valve - Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Drag Conveyor) - Remove and Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Auger Conveyor) - Remove and Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Reference Material
AS2251 and AS2301 Front Mounted Screed Screed Plate (Main) - Remove and Install - CWF1-UP
16H Motor Grader Power Train Transmission Control Valve - Remove
CB-214E, CB-224E and CB-225E Vibratory Compactors Propel System Electrical Schematic
AS2251 and AS2301 Screeds Hydraulic Cylinder (Extender Extend) - AS-2301
AP-655C and BG-2255C Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Install
16H Motor Grader Power Train Transmission and Transfer Gears - Remove
AS2251 and AS2301 Front Mounted Screed Glow Plug - Remove and Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Blower Motor - Remove and Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Remove - CWF1-UP
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
AS2251 and AS2301 Front Mounted Screed Burner Group (Extender) - Remove - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Group (Main) - Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Burner Group (Extender) - Install - CWF1-UP
AS2251 and AS2301 Front Mounted Screed Gerotor Motor (Vibratory - Main) - Remove - CWF1-UP
533 and 543 Wheel Feller Bunchers Monitoring System
Assembly Procedure For the 785B and 785C Dual Slope Truck Body{7258, 7960} Assembly Procedure For the 785B and 785C Dual Slope Truck Body{7258, 7960}
AS2251 and AS2301 Front Mounted Screed Gerotor Motor (Vibratory - Main) - Install - CWF1-UP