Deflector Plate Adjustment (Strike-Off)
Show/hide table
 |
Personal injury can result from rotating and moving parts. Stay clear of all rotating and moving parts. Never attempt adjustments while the machine is moving or the engine is running unless otherwise specified. The machine must be parked on a level surface and the engine stopped. Attach a "Do Not Operate" or similar warning tag to the start switch and controls before servicing, repairing, or making adjustments to the machine. |
 |
The deflector plate must be adjusted so the edge of the plate is at the top of the radius of the nose piece.
- Loosen locknuts (2) in order to adjust the deflector plate (3) .
Show/hide table
 | |
| Illustration 1 | g00803303 |
- Use adjustment rods (1) to position deflector plate (3). Adjust the rods until the edge of the plate is at the top of the radius on the nose piece.
- With the plate in the proper position, tighten locknuts (2) .
Caterpillar Information System:
12M Motor Grader Seat
267B, 277B and 287B Multi Terrain Loaders Machine Systems Fuel Tank - Remove and Install
16H Motor Grader Power Train Service Brake (Wheel Spindle) - Install
2004/04/26 Accelerator Hinge Pin Instructions Are Now Included with Parts Kit {1276}
SCJ and 8SC Series Alternators Alternator - Assemble
120M and 12M Motor Graders Steering Frame Lock
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1957 - FMI 08
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1957 - FMI 04
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1957 - FMI 03
16H Motor Grader Power Train Service Brake (Wheel Spindle) - Remove
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble
C27 and C32 Generator Set Engines Engine Design
2004/05/03 New Transmission Solenoid Valve Groups Are Now Being Used {3174}
248B and 268B Skid Steer Loaders Machine Systems Control Valve (Work Tool)
793C, 793C XQ and 793D Off-Highway Truck Fast Fill Fluid Center Fluids Service System Troubleshooting
120M and 12M Motor Graders Equipment Lowering with Engine Stopped
8-16B and 10-20B Extend-A-Mat Screed Extender Carriage - Remove
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head
120M and 12M Motor Graders Access Doors and Covers
770 and 772 Off-Highway Truck Engine Oil and Filter - Change
2004/06/14 New Cast Wheels Replace The Existing Cast Wheels {4201, 4209}
R2900G Load Haul Dump Power Train Gear Pump (Torque Converter Scavenge) - Disassemble
R2900G Load Haul Dump 3406E Engine Supplement Exhaust Purifier - Remove
R2900G Load Haul Dump Power Train Gear Pump (Torque Converter Scavenge) - Assemble