Exhaust Purifier - Remove
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help prevent dirt from entering the internal mechanism.
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Remove heat shields (1) and (2) .
Show/hide table
Illustration 1 | g01067401 |
- Remove three bolts (3) and three retainers (4) .
Show/hide table
Illustration 2 | g01067403 |
- Remove two bolts (5) and two retainers (6) .
Show/hide table
Illustration 3 | g01067405 |
- Remove elbow (7) .
Show/hide table
Illustration 4 | g01067406 |
- Remove heat shield (8) .
- Attach a suitable lifting device to exhaust purifier (9). The weight of exhaust purifier (9) is approximately 27 kg (60 lb).
Show/hide table
Illustration 5 | g01067409 |
- Remove exhaust purifier (9) .
Caterpillar Information System:
R2900G Load Haul Dump Power Train Gear Pump (Torque Converter Scavenge) - Disassemble
2004/06/14 New Cast Wheels Replace The Existing Cast Wheels {4201, 4209}
770 and 772 Off-Highway Truck Engine Oil and Filter - Change
120M and 12M Motor Graders Access Doors and Covers
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head
8-16B and 10-20B Extend-A-Mat Screed Extender Carriage - Remove
120M and 12M Motor Graders Equipment Lowering with Engine Stopped
793C, 793C XQ and 793D Off-Highway Truck Fast Fill Fluid Center Fluids Service System Troubleshooting
248B and 268B Skid Steer Loaders Machine Systems Control Valve (Work Tool)
2004/05/03 New Transmission Solenoid Valve Groups Are Now Being Used {3174}
10-20B and 8-16B EXTEND A MAT SCREEDS Deflector Plate Adjustment (Strike-Off)
12M Motor Grader Seat
R2900G Load Haul Dump Power Train Gear Pump (Torque Converter Scavenge) - Assemble
R1600G Load Haul Dump Remote Control System Relays
R2900G Load Haul Dump 3406E Engine Supplement Exhaust Purifier - Install
R1600G Load Haul Dump Remote Control System Receiver - Replace
R1600G Load Haul Dump Remote Control System Interface Control Module - Replace
2004/05/03 New Hoses For the Steering Cylinders Are Available {4304}
2004/04/19 Special Instruction, REHS2213, "Checking for Variations of the Torsion Axles" Is Available {3282, 4150}
2004/06/14 A New Piston Pin Retainer is Used {1214}
2004/06/01 A New Piston Pin Retainer is Used {1214}
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1958 - FMI 03
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1958 - FMI 04
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1958 - FMI 08