Gear Motor - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Description | Qty |
| ZZ | 6V-9831 | Cap As | 2 |
| 6V-9510 | Face Seal Plug | 2 | |
| 6V-9829 | Cap As | 1 | |
| 6V-9508 | Face Seal Plug | 1 | |
Start By:
- Remove the piston pump. Refer to Disassembly and Assembly, "Piston Pump - Remove".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
- Disconnect harness assembly (2). Disconnect hose assembly (3) from gear motor (1) .
Show/hide table
 | |
| Illustration 1 | g01067060 |
- Disconnect hose assemblies (6) and (7). Remove bolts (4). Remove gear motor (1) from support housing (5). Remove gear motor (1) from the machine.
Show/hide table
 | |
| Illustration 2 | g01037827 |
- Remove nut (7) and solenoid (8) .
Show/hide table
 | |
| Illustration 3 | g01037834 |
- Loosen setscrew (9). Remove coupler (10). Remove fitting (11) and solenoid valve (12) .
Show/hide table
 | |
| Illustration 4 | g01037839 |
Caterpillar Information System:
2004/04/19 A New Valve Cover Seal and New Valve Cover Fasteners are Now Available {1107}
267B, 277B and 287B Multi Terrain Loaders Machine Systems Refrigerant Condenser and Mounting - Remove and Install
CB-214E, CB-224E and CB-225E Vibratory Compactors Propel System Piston Motors (Drum Propel and Wheel Propel)
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1956 - FMI 08
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1956 - FMI 04
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1956 - FMI 03
267B, 277B and 287B Multi Terrain Loaders Machine Systems Refrigerant Compressor and Support Housing - Remove and Install
10-20B and 8-16B EXTEND A MAT SCREEDS Additional Messages
267B, 277B and 287B Multi Terrain Loaders Machine Systems Solenoid Valve (Compressor Motor) - Remove and Install
160M Motor Grader Specifications
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 0603 - FMI 04
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 0603 - FMI 03
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203} Bench Test Procedure for Hydraulic Piston Pumps {3203}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
R1300G Load Haul Dump 3306 Engine Supplement Radiator - Install
2004/04/19 Special Instruction, REHS2144, "Installation of Heavy Duty Brakes" Is Available {3278, 4251}
12M Motor Grader Backup Alarm
793C, 793C XQ and 793D Off-Highway Truck Fast Fill Fluid Center General Information
267B, 277B and 287B Multi Terrain Loaders Machine Systems Gear Motor - Install
16H Motor Grader Power Train Wheel and Tire (Rear) - Remove and Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Heater Coil - Remove
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 0623 - FMI 03
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install