914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Caterpillar

Removal Procedure

Start By:

1. Remove the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".

Show/hide table

Accidental machine starting can cause injury or death to personnel working on the machine. To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps. Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.

1. Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".

2. Release the tension on the V-belts. Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace".

Show/hide table



Illustration 1	g01052611

3. Remove bolts (1) .

4. Disconnect harness assemblies (4) .

5. Remove bolts (3) .

6. Remove alternator (2) .

Installation Procedure

Show/hide table



Illustration 2	g01052611

1. Install alternator (2) .

2. Install bolts (1) .

3. Install bolts (3) .

4. Connect harness assemblies (4) .

5. Adjust the tension on the V-belts. Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace".

6. Turn the battery disconnect switch to the ON position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".

End By: Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".