Bogie
Show/hide table
Illustration 1 | g00928113 |
There is an upper bogie assembly and lower bogie assembly on each side of the machine. |
Install roller (1) to dimension (B) at four locations on each side of the machine. Dimension (B) is 14.8 ± 2 mm (0.58 ± 0.08 inch).
Show/hide table
Illustration 2 | g00928145 |
Note: Refer to the Disassembly and Assembly manual for your machine for the installation procedure.
(2) torque for nut ... 34 ± 7 N·m (25 ± 5 lb ft)
Fill cover (3) with 2P-9869 Oil .
Apply 6V-5765 Sealant between cover ( 3) and hub (4).
Caterpillar Information System:
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Parking Brake
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Muffler - Remove and Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Hood - Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Hood - Remove
770 and 772 Off-Highway Truck Service Ports
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Machine Preparation for Troubleshooting
TH210 and TH215 Telehandlers Power Train Differential and Bevel Gear (Front) - Install
PS-150C Paving Compactor Circuit Breakers - Reset
561N Pipelayer Backup Alarm
PS-150C Paving Compactor Ballast - Remove/Install
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Tilt Cylinder - Install
PS-150C Paving Compactor Backup Alarm - Test
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Alternator - Remove and Install
PS-150C Paving Compactor Cooling System Coolant (ELC) - Change
247B, 247B2, 257B and 257B2 Multi Terrain Loaders Power Train Track Drive - Remove
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Air Cleaner - Remove and Install
2004/02/16 Correction to Specifications , "Fan Drive" {1359}
2004/03/01 Caterpillar Digital Voltage Regulator (CDVR) Is Now Being Used {4467}
2004/03/01 New Speedometers Will Improve Reliability {7463}
R1300G Load Haul Dump Power Train Final Drive and Wheel - Remove
725 and 730 Articulated Trucks Braking System Pressure Switch (Low Brake Pressure)
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Operational Checks
2004/02/23 An Improved Assembly Process Is Used for Installing the Clutch Piston Seals {0720, 3030, 3170}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Engine Oil Pan - Remove and Install - Engine in Chassis