Track Drive - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| ZZ | 6V-9511 | Face Seal Plugs (1 3/16 - 12 THD) | 2 |
| 6V-9832 | Cap As (1 3/16 - 12 THD) | 2 | |
| 6V-9509 | Face Seal Plug (1 3/16 - 16 THD) | 1 | |
| 6V-9830 | Cap As (13/16 - 16 THD) | 1 | |
| 6V-9508 | Face Seal Plug (1 1/16 - 16 THD) | 1 | |
| 6V-9829 | Cap As (1 1/16 - 16 THD) | 1 | |
Start By:
- Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
- Remove the track. Refer to Disassembly and Assembly, "Track (Rubber) - Remove".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
- Use a suitable lifting device to support the track drive. The weight of track drive (2) is approximately
120 kg (265 lb) . Remove bolt (1). Remove bolt (3).Show/hide table
Illustration 2 g01053290 - Disconnect hose assembly (5). Remove fitting (4).
- Disconnect hose assembly (6). Disconnect hose assembly (7).
Show/hide table
Illustration 3 g01053291 - Disconnect hose assembly (8).
Show/hide table
Illustration 4 g01053342 - Remove track drive (2) from the machine. The weight of the track drive is approximately
120 kg (265 lb) . - Install caps and plugs in order to prevent leakage and contamination..
Show/hide table
| |
| Illustration 1 | g01053340 |
Caterpillar Information System:
PS-150C Paving Compactor Cooling System Coolant (ELC) - Change
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Alternator - Remove and Install
AP-1055B and BG-2455C Asphalt Pavers Propel System Bogie
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Parking Brake
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Muffler - Remove and Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Hood - Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Hood - Remove
770 and 772 Off-Highway Truck Service Ports
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Machine Preparation for Troubleshooting
TH210 and TH215 Telehandlers Power Train Differential and Bevel Gear (Front) - Install
PS-150C Paving Compactor Circuit Breakers - Reset
561N Pipelayer Backup Alarm
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Air Cleaner - Remove and Install
2004/02/16 Correction to Specifications , "Fan Drive" {1359}
2004/03/01 Caterpillar Digital Voltage Regulator (CDVR) Is Now Being Used {4467}
2004/03/01 New Speedometers Will Improve Reliability {7463}
R1300G Load Haul Dump Power Train Final Drive and Wheel - Remove
725 and 730 Articulated Trucks Braking System Pressure Switch (Low Brake Pressure)
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Operational Checks
2004/02/23 An Improved Assembly Process Is Used for Installing the Clutch Piston Seals {0720, 3030, 3170}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Engine Oil Pan - Remove and Install - Engine in Chassis
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Turbocharger - Remove
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Engine Supplement Turbocharger - Install
PS-150C Paving Compactor Cooling System Coolant Extender (ELC) - Add