Lift Arm Cylinder and Mounting
Show/hide table
 | |
| Illustration 1 | g03774229 |
Show/hide table
| Specification for 218-5799 Lift Arm Cylinder and Mounting Gp | |||
| Item | Qty | Part | Specification Description |
| Before assembly, all pins, bores, and bearings must be clean. All pins, bores, and bearings must be lubricated with black 5P-0960 Grease Cartridge that is being sealed. Lubricate the entire cylindrical surface of all pins. | |||
| 1 | 4 | 142-9090 Pin As | Diameter of pin is 38.030 ± 0.030 mm (1.4972 ± 0.0012 inch). Length of pin is 157.0 ± 1.5 mm (6.18 ± 0.06 inch). |
| 2 | 2 | 3K-2151 Bushing | Internal diameter after assembly is 38.260 ± 0.020 mm (1.5063 ± 0.0008 inch). |
| 3 | 2 | 142-9093 Pin | Diameter of pin is 38.030 ± 0.030 mm (1.4972 ± 0.0012 inch). Length of pin is 150.0 ± 1.5 mm (5.91 ± 0.06 inch). |
| 4 | 2 | 142-9091 Pin As | Diameter of pin is 38.030 ± 0.030 mm (1.4972 ± 0.0012 inch). Length of pin is 125.0 ± 1.5 mm (4.92 ± 0.06 inch). |
| 5 | 2 | 142-9091 Pin As | Diameter of pin is 38.030 ± 0.030 mm (1.4972 ± 0.0012 inch). Length of pin is 125.0 ± 1.5 mm (4.92 ± 0.06 inch). |
Show/hide table
 | |
| Illustration 2 | g03774230 |
View F-F | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 6 | 2 | 142-9094 Pin | Diameter of pin is 38.030 ± 0.030 mm (1.4972 ± 0.0012 inch). Length of pin is 120.0 ± 1.0 mm (4.72 ± 0.04 inch). |
| 7 | 4 | 1H-8134 Retaining Ring | Internal diameter is 34.85 to 35.48 mm (1.372 to 1.397 inch). Thickness is 1.22 to 1.37 mm (0.048 to 0.054 inch). |
Caterpillar Information System:
572R Series II Pipelayer Power Train General Information
2003/10/06 Use 1U-9891 Hydraulic Oil Additive to Eliminate Brake Chatter and Reduce Noise in the Limited Slip Differential {3263, 5095}
572R Series II Pipelayer Hydraulic System Load Sense Manifold
572R Series II Pipelayer Hydraulic System Check Valve
572R Series II Pipelayer Hydraulic System Pressure Reducing Valve
572R Series II Pipelayer Hydraulic System Shuttle Valve
416D, 420D and 430D Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front) - Adjust
572R Series II Pipelayer Hydraulic System Main Relief Valve
267, 277 and 287 Multi Terrain Loaders Power Train Solenoid Valve and Mounting (Parking Brake) - Remove and Install - 287 Multi Terrain Loaders
572R Series II Pipelayer Hydraulic System Boom and Hook Control Valve
2003/09/01 New Software Is Used on Product Link 151/201 {7606, 7620}
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Engine Supplement Unit Injector Hydraulic Pump - Remove - Engine In Chassis
572R Series II Pipelayer Hydraulic System Hydraulic Tank and Filter
572R Series II Pipelayer Hydraulic System Troubleshooting
572R Series II Pipelayer Hydraulic System Load Sense Manifold - Test and Adjust
572R Series II Pipelayer Hydraulic System Pressure Reducing Valve - Test and Adjust
572R Series II Pipelayer Equalizer Bar
416D, 420D and 430D Backhoe Loaders Axles, Differential and Brakes Axle (Front)
248B and 268B Skid Steer Loaders Machine Systems Lift Arm Cylinder and Mounting
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
416D, 420D and 430D Backhoe Loaders Axles, Differential and Brakes Parking Brake Control
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines General Information
2003/09/01 Oversized Bearings are Available for Reconditioning of Remanufactured Engine Oil Pumps and Scavenge Oil Pumps {1304, 1312}