Brake Release Cylinder
Show/hide table
Illustration 1 | g00941403 |
(1) (2) Apply Loctite 7649 Primer N and then apply Loctite 545 to the threads of the plugs prior to assembly.
- Torque for the two plugs ... 20 N·m (15 lb ft)
(3) Torque for the five bolts ... 215 ± 40 N·m (160 ± 30 lb ft)
(4) Torque for the two bolts ... 47 ± 9 N·m (35 ± 7 lb ft)
(5) 9D-6135 Spring
- Compressed length ... 77.29 mm (3.043 inch)
- Free length after test ... 115.49 mm (4.547 inch)
- Spring force at working length ... 903.3 N (203.071 lb)
- Free length after test ... 115.49 mm (4.547 inch)
Caterpillar Information System:
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator Testing and Charging (If Equipped)" {5077}
R1300G Load Haul Dump Braking System Solenoid Valve (Parking Brake)
R1300G Load Haul Dump Braking System Brake Control Valve (Parking)
R1300G Load Haul Dump Braking System Pressure Reducing Valve (Parking Brake Oil)
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator - Test and Charge" {5077}
R1600 Load Haul Dump Operator Mode Scroll Switch
R1600G Load Haul Dump Lift Arm Positioner Switch
R1600G Load Haul Dump Remote Control Switch - If Equipped
RM-350B Reclaimer/Mixer Power Train Service Brake - Install
RM-350B Reclaimer/Mixer Power Train Service Brake - Remove
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Battery and Battery Cable - Separate and Connect
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Suction Fan (Fan and Fan Motor) - Disassemble
TH210 and TH215 Telehandlers Machine Systems Cab - Remove
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Joystick Control - Remove and Install
8-16B Asphalt Screed Power Adjuster Motor (Crown)
2002/12/02 Correction to Testing and Adjusting , "Service Brake Control (Pedal) - Adjust" {4269, 4269}
C15 Petroleum Generator Set Engines Cylinder Head Valves
8-16B Asphalt Screed Gerotor Motor (Vibratory)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Axle - Remove
R1600G Load Haul Dump Ride Control - If Equipped
8-16B Asphalt Screed Power Adjuster Motor (Height)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Axle - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Articulating and Oscillating Hitch - Remove
8-16B Asphalt Screed Solenoid Valve (Extender)