2002/12/02 Caterpillar


Correction to Testing and Adjusting , "Service Brake Control (Pedal) - Adjust" {4269, 4269}

Usage:

16H NA 6ZJ
Motor Grader:
14H (S/N: 7WJ664-UP)
16H (S/N: 6ZJ331-UP)
Systems Operation, Testing and Adjusting, RENR1422, "14H and 16H Motor Graders Air System and Brakes", "Service Brake Control (Pedal) - Adjust". This module is part of Service Manual, RENR1405 and Service Manual, RENR1410.

The information for Dimension (A) is incorrect. Dimension (A) is found in the caption for Illustration 44. The information in the note in Step 4 is incorrect. Refer to the following information.

(A) ... 122 ± 6 mm (4.8 ± 0.2 inch)

Note: There should be 530 ± 2 mm (20.9 ± 0.1 inch) from the centerline to the centerline of the holes in the rod ends (9) and (10). Pedal height (A) should be 122 ± 6 mm (4.8 ± 0.2 inch) from the bottom edge of pedal (5) to cab floorplate (8).

Caterpillar Information System:

8-16B Asphalt Screed Power Adjuster Motor (Crown)
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Joystick Control - Remove and Install
TH210 and TH215 Telehandlers Machine Systems Cab - Remove
R1300G Load Haul Dump Braking System Brake Release Cylinder
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator Testing and Charging (If Equipped)" {5077}
R1300G Load Haul Dump Braking System Solenoid Valve (Parking Brake)
R1300G Load Haul Dump Braking System Brake Control Valve (Parking)
R1300G Load Haul Dump Braking System Pressure Reducing Valve (Parking Brake Oil)
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator - Test and Charge" {5077}
R1600 Load Haul Dump Operator Mode Scroll Switch
R1600G Load Haul Dump Lift Arm Positioner Switch
R1600G Load Haul Dump Remote Control Switch - If Equipped
C15 Petroleum Generator Set Engines Cylinder Head Valves
8-16B Asphalt Screed Gerotor Motor (Vibratory)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Axle - Remove
R1600G Load Haul Dump Ride Control - If Equipped
8-16B Asphalt Screed Power Adjuster Motor (Height)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Axle - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Articulating and Oscillating Hitch - Remove
8-16B Asphalt Screed Solenoid Valve (Extender)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Articulating and Oscillating Hitch - Install
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems Wheel and Tire - Remove and Install
8-16B Asphalt Screed Glow Plugs
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Propel Control (Direction, Speed) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.