Joystick Control - Remove and Install
Removal Procedure
Start By:
- Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Note: Put identification marks on all wires for installation purposes.
- Loosen knob (1) in order to remove cushion (2). Remove cover (3) and cover (4) .
Show/hide table
Illustration 1 | g00941410 |
- Disconnect three electrical connectors (5) from joystick control (6) .
Show/hide table
Illustration 2 | g00941411 |
- Lift boot (7) in order to gain access to the top side of joystick control (6) .
Show/hide table
Illustration 3 | g00941412 |
- Remove four bolts (8) and the washers before carefully removing joystick control (6) from the machine.
Show/hide table
Illustration 4 | g00941413 |
Installation Procedure
- Position joystick control (6) and install four bolts (8) and the washers in order to secure the joystick control to the machine.
Show/hide table
Illustration 5 | g00941413 |
- Install boot (7) .
Show/hide table
Illustration 6 | g00941412 |
- Connect three electrical connectors (5) to joystick control (6) .
Show/hide table
Illustration 7 | g00941411 |
- Install cover (4) and cover (3). Install cushion (2) and tighten knob (1) .
Show/hide table
Illustration 8 | g00941410 |
End By:
- Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
- Calibrate the joystick control. Refer to Systems Operation, Testing and AdjustingRENR5188, "Main Control Valve (Implement) - Calibrate".
Caterpillar Information System:
TH210 and TH215 Telehandlers Machine Systems Cab - Remove
R1300G Load Haul Dump Braking System Brake Release Cylinder
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator Testing and Charging (If Equipped)" {5077}
R1300G Load Haul Dump Braking System Solenoid Valve (Parking Brake)
R1300G Load Haul Dump Braking System Brake Control Valve (Parking)
R1300G Load Haul Dump Braking System Pressure Reducing Valve (Parking Brake Oil)
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator - Test and Charge" {5077}
R1600 Load Haul Dump Operator Mode Scroll Switch
R1600G Load Haul Dump Lift Arm Positioner Switch
R1600G Load Haul Dump Remote Control Switch - If Equipped
RM-350B Reclaimer/Mixer Power Train Service Brake - Install
RM-350B Reclaimer/Mixer Power Train Service Brake - Remove
8-16B Asphalt Screed Power Adjuster Motor (Crown)
2002/12/02 Correction to Testing and Adjusting , "Service Brake Control (Pedal) - Adjust" {4269, 4269}
C15 Petroleum Generator Set Engines Cylinder Head Valves
8-16B Asphalt Screed Gerotor Motor (Vibratory)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Axle - Remove
R1600G Load Haul Dump Ride Control - If Equipped
8-16B Asphalt Screed Power Adjuster Motor (Height)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Axle - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Articulating and Oscillating Hitch - Remove
8-16B Asphalt Screed Solenoid Valve (Extender)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Paving Compactors Machine Systems Articulating and Oscillating Hitch - Install
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems Wheel and Tire - Remove and Install