RM-350B Reclaimer/Mixer Power Train Caterpillar


Service Brake - Install

Usage:

RM-350B AXW

Installation Procedure




    Illustration 1g00888524

  1. Install service brake (1) on the axle and install four bolts (2). Tighten the bolts to a torque of 1140 ± 150 N·m (840 ± 110 lb ft).

  1. Install hose assembly (3) on the service brake.

End By: Install the tire and rim (front). Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".

Caterpillar Information System:

RM-350B Reclaimer/Mixer Power Train Service Brake - Remove
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Battery and Battery Cable - Separate and Connect
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Suction Fan (Fan and Fan Motor) - Disassemble
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Suction Fan (Fan and Fan Motor) - Assemble
R1600G Load Haul Dump Light Switches
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Separate
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Install
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Connect
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Pump Drive - Remove and Install
Procedure for Replacing the Control Valve for the Suspension and Hoist Systems on the D40D Articulated Trucks{7214} Procedure for Replacing the Control Valve for the Suspension and Hoist Systems on the D40D Articulated Trucks{7214}
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0986 - FMI 02
R1600G Load Haul Dump Remote Control Switch - If Equipped
R1600G Load Haul Dump Lift Arm Positioner Switch
R1600 Load Haul Dump Operator Mode Scroll Switch
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator - Test and Charge" {5077}
R1300G Load Haul Dump Braking System Pressure Reducing Valve (Parking Brake Oil)
R1300G Load Haul Dump Braking System Brake Control Valve (Parking)
R1300G Load Haul Dump Braking System Solenoid Valve (Parking Brake)
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator Testing and Charging (If Equipped)" {5077}
R1300G Load Haul Dump Braking System Brake Release Cylinder
TH210 and TH215 Telehandlers Machine Systems Cab - Remove
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Joystick Control - Remove and Install
8-16B Asphalt Screed Power Adjuster Motor (Crown)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.