Battery and Battery Cable - Separate and Connect
Separation Procedure
- Turn the engine start switch to the OFF position. Turn all switches to the OFF position.
- Turn the battery disconnect switch to the OFF position. Remove the battery disconnect switch key.
- Remove bolts (1) and cover (2) from both sides of the machine.
Show/hide table
Illustration 1 | g00943774 |
- Disconnect battery cable (3) from battery (5) .
Show/hide table
Illustration 2 | g00943776 |
Note: Do not allow the disconnected battery cables to contact the disconnect switch. Do not allow the disconnected battery cables to contact the other cables. Do not allow the disconnected battery cables to contact the opposite terminal of either battery.
- Disconnect battery cable (4) from battery (5) .
- Disconnect battery cable (6) from battery (8) .
Show/hide table
Illustration 3 | g00943777 |
- Disconnect battery cable (7) from battery (8) .
Connection Procedure
- Connect battery cable (7) to battery (8) .
Show/hide table
Illustration 4 | g00943777 |
Note: Do not allow the disconnected battery cables to contact the disconnect switch. Do not allow the disconnected battery cables to contact the other cables. Do not allow the disconnected battery cables to contact the opposite terminal of either battery.
- Connect battery cable (6) to battery (8) .
- Connect battery cable (4) to battery (5) .
Show/hide table
Illustration 5 | g00943776 |
- Connect battery cable (3) to battery (5) .
- Install cover (2) and bolts (1) on both sides of the machine.
Show/hide table
Illustration 6 | g00943774 |
Caterpillar Information System:
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Suction Fan (Fan and Fan Motor) - Disassemble
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Suction Fan (Fan and Fan Motor) - Assemble
R1600G Load Haul Dump Light Switches
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Remove
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Separate
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Install
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Radiator, Hydraulic Oil Cooler, Air Cooler, and Fuel Cooler - Connect
CP-563E, CS-563E, CP-573E, CS-573E and CS-583E Vibratory Compactors Engine Supplement Pump Drive - Remove and Install
Procedure for Replacing the Control Valve for the Suspension and Hoist Systems on the D40D Articulated Trucks{7214} Procedure for Replacing the Control Valve for the Suspension and Hoist Systems on the D40D Articulated Trucks{7214}
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0986 - FMI 02
R1600G Load Haul Dump Indicators
C15 Petroleum Generator Set Engines Electronic Unit Injector Wiring
RM-350B Reclaimer/Mixer Power Train Service Brake - Remove
RM-350B Reclaimer/Mixer Power Train Service Brake - Install
R1600G Load Haul Dump Remote Control Switch - If Equipped
R1600G Load Haul Dump Lift Arm Positioner Switch
R1600 Load Haul Dump Operator Mode Scroll Switch
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator - Test and Charge" {5077}
R1300G Load Haul Dump Braking System Pressure Reducing Valve (Parking Brake Oil)
R1300G Load Haul Dump Braking System Brake Control Valve (Parking)
R1300G Load Haul Dump Braking System Solenoid Valve (Parking Brake)
2002/12/23 Correction to Systems Operation Testing and Adjusting "Ride Control Accumulator Testing and Charging (If Equipped)" {5077}
R1300G Load Haul Dump Braking System Brake Release Cylinder
TH210 and TH215 Telehandlers Machine Systems Cab - Remove