416E Backhoe Loader Caterpillar


Two Lever Control (Backhoe)(Standard Pattern) - If Equipped

Usage:

416E BWC

Gerak Boom dan Swing Backhoe




Ilustrasi 1g00732799

Catatan: Stabilizer harus berada dalam posisi naik penuh atau dalam posisi turun penuh sewaktu boom di ayun sebesar 90 derajat ke salah satu sisi.


Boom Turun (1) - Gerakkan tuas ke posisi ini untuk menurunkan boom.


Boom Naik (2) - Gerakkan tuas ke posisi ini untuk mengangkat boom.


Swing Kiri (3) - Gerakkan tuas ke posisi ini untuk menggerakkan boom ke kiri. Boom harus bergerak pada arah yang sama dengan tuas.


Swing Kanan (4) - Gerakkan tuas ke posisi ini untuk menggerakkan boom ke kanan. Boom harus bergerak pada arah yang sama dengan tuas.

Tahan (5) - Gerakkan tuas ke posisi ini untuk menghentikan gerakan boom. Lepaskan tuas dari posisi yang lain. Tuas akan kembali ke posisi TAHAN.

Gerak Stick dan Bucket Backhoe




Ilustrasi 2g00732808


Stick Keluar (1) - Gerakkan tuas ke posisi ini untuk menggerakkan stick ke arah luar.


Stick Masuk (2) - Gerakkan tuas ke posisi ini untuk menggerakkan stick ke arah dalam.


Bucket Memuat (3) - Gerakkan tuas ke posisi ini untuk melakukan penggalian dengan bucket.


Bucket Membuang (4) - Gerakkan tuas ke posisi ini untuk mengosongkan isi bucket.

Tahan (5) - Gerakkan tuas ke posisi ini untuk menghentikan gerakan stick dan bucket. Lepaskan tuas dari posisi yang lain. Tuas akan kembali ke posisi TAHAN.

Caterpillar Information System:

HF181 Felling Head, HF201 Felling Head and HF221 Felling Head for Track Feller Bunchers Disc Saw Tooth - Remove and Install
TH210 and TH215 Telehandlers Machine Systems Fuel Tank - Remove
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Grapple Arm - Remove - HF202
797B Off-Highway Truck Brake Accumulator (Service) - Install
8-16B Asphalt Screed Flow Control Valve (Vibratory)
TH350B, TH355B, TH360B and TH460B Telehandlers Stopping the Engine
TH350B, TH355B, TH360B and TH460B Telehandlers Engine Starting
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0989 - FMI 08
R1300G and R1300G Series II Load Haul Dumps Steering System Pressure Reducing Valve (Pilot Oil)
R1300G and R1300G Series II Load Haul Dumps Steering System Gear Pump (Secondary Steering)
R1300G and R1300G Series II Load Haul Dumps Hydraulic System Vane Pump (Implement, Steering, Pilot and Braking)
R1300G Load Haul Dump Power Train Rim Mounting
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Caterpillar Monitoring System for AP Tachometer Mode
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429} Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
2002/11/18 New Procedure for Adjustment of Wheel Bearing Preload {4051}
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Caterpillar Monitoring System for AP Service Mode
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Caterpillar Monitoring System for AP Units Mode
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Two Lever Control (Backhoe)(Excavator Pattern) - If Equipped
554 and 574 Forwarders Power Train Brake Cylinder Stroke - Test and Adjust
554 and 574 Forwarders Power Train Brake Disc Wear - Check
554 and 574 Forwarders Power Train Brake System Air - Purge
554 and 574 Forwarders Power Train Piston Pump (Hydraulic Neutral Adjustment) - Test and Adjust
A Basic Guide for Users of the Caterpillar Machine Security System (MSS){7631} A Basic Guide for Users of the Caterpillar Machine Security System (MSS){7631}
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Two Lever Control (Backhoe)(Universal Pattern)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.