Remanufactured Water Pump For 3500 Engine Caterpillar


Remanufactured Water Pump For 3500 Engine

Usage:



ENGINES

OFF-HIGHWAY TRACTORS

OFF-HIGHWAY TRUCKS

TRACK-TYPE TRACTORS

WHEEL LOADERS

EXCAVATORS

3500 FAMILY OF ENGINES, CATERPILLAR MACHINES POWERED BY 3500 ENGINES

Problem:

The nut that fastens the water pump impeller to the water pump shaft may NOT have been properly tightened on some of these water pumps. This could allow the impeller to slip on the shaft. The result could be reduced water pump efficiency that could lead to engine overheating.

Solution:

Check all stocks of Remanufactured 0R-9670, 0R-9671, 0R-9672, and 0R-9673 Water Pumps to be sure that the impeller retaining nut is tightened to 200 ( 25 N·m (150 ( 18 lb ft). See the illustration.


LOCATION OF IMPELLER RETAINING NUT

COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Torque Converter Turbine Rubbing And Wear Torque Converter Turbine Rubbing And Wear
Oil Pan Cracking Oil Pan Cracking
Generator Lead Connections Can Rub Against The Terminal Box Or Each Other Generator Lead Connections Can Rub Against The Terminal Box Or Each Other
Certain Air Dryers Should be Removed From Dealer Inventory Certain Air Dryers Should be Removed From Dealer Inventory
Surface Cracks Found In 138-7574 Link Bracket Surface Cracks Found In 138-7574 Link Bracket
Low Idle Instability Low Idle Instability
Machining Premachined Valve Seat Inserts Machining Premachined Valve Seat Inserts
3300 Engine Oil Level Maintenance And High Oil Consumption 3300 Engine Oil Level Maintenance And High Oil Consumption
3306 Engine Oil Pan Plate Leaks 3306 Engine Oil Pan Plate Leaks
3300 Generator Set Oil Level Maintenance And High Oil Consumption 3300 Generator Set Oil Level Maintenance And High Oil Consumption
Camshaft Injector Lifter (Roller Follower) Assembly Replacement Camshaft Injector Lifter (Roller Follower) Assembly Replacement
EMCP NFPA 99 Ran Annunciator Modules Will Not Perform As Specified EMCP NFPA 99 Ran Annunciator Modules Will Not Perform As Specified
Turbocharger Mounting Studs Turbocharger Mounting Studs
Cylinder Block Bore Wear Cylinder Block Bore Wear
3300V/2400V Primary Taps Have Not Been Capped When The Third Transformer Is Installed For Use With EMCPII+ Control Panels 3300V/2400V Primary Taps Have Not Been Capped When The Third Transformer Is Installed For Use With EMCPII+ Control Panels
Connecting Rod Bearings Connecting Rod Bearings
Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump
Engine Electronic Control Module (ECM) Configuration Parameters Engine Electronic Control Module (ECM) Configuration Parameters
Exhaust Manifold Bolts Exhaust Manifold Bolts
Test Cell Oil Screen And Oil Filter Test Cell Oil Screen And Oil Filter
Inspection Of The Unit Injector Lifter Assembly Inspection Of The Unit Injector Lifter Assembly
Wiring For The Energized-To-Run Fuel Shutoff Solenoid Wiring For The Energized-To-Run Fuel Shutoff Solenoid
Testing The Function Of The 3E6477 Relay Assembly (24 Volt) Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.