Usage:
914G (7ZM, 9WM) Wheel Loaders;
IT14G (8ZM, 1WN) Integrated Toolcarriers
Reference: Service Magazine; September 9, 1996; Page 10; "Do Not Wash Hot Fuel Injection Pump With Cold Water"
NOTICE |
---|
Do NOT wash the 123-2937 Fuel Injection Pump Group (when hot) with cold water. The abrupt temperature change can cause pump seizure.
|
A new 140-9568 Plate, 109-5211 Bracket Assembly, and 141-7462 Film (decal) is available in order to provide some protection from cold water directly hitting the 123-2937 Fuel Injection Pump Group. The governor cable bracket has been modified in order to provide a mount location for the plate. The 140-9568 Plate mounts directly over the 123-2937 Fuel Injection Pump Group and acts as a shield. The 141-7462 Film warns against washing a hot fuel injection pump. This improvement is effective with 914G (7ZM358-Up, 9WM760-Up) Wheel Loaders, and IT14G (8ZM251-Up, 1WN499-Up) Integrated Toolcarriers.
Parts service is available for the 123-2937 Fuel Injection Pump Group used on the engines in the above machines. See the following list for serviceable parts: