Usage:
1. Remove the guard below the engine. Weight is approximately 66 kg (146 lb.).
2. Remove drain plug (2), and drain the oil from the oil pan.
3. Remove the oil level gauge from the engine.
4. Remove 28 bolts (1) that hold oil pan (3) in place, and remove the oil pan.
5. Remove bolts (5) that hold suction tube (4) in place, and remove the suction tube.
Install Oil Pan
1. Put suction tube (1) in position on the oil pump cover, and install the two bolts that hold it in place. Install the bolt that holds clip (2) to the cylinder block.
2. Inspect the oil pan gasket, and install a new gasket if needed.
3. Put oil pan (3) in position on the engine, and install the 28 bolts that hold it in place.
4. Install the oil level gauge.
5. Tighten drain plug (4) to a torque of 54 ± 6 N·m (40 ± 4 lb.ft.).
6. Fill the engine with oil to the correct level. See the Maintenance Guide.
7. Install the guard below the engine.