Diesel Exhaust Fluid Tank
Show/hide table
图 1 | g03653990 |
Show/hide table
图 2 | g03654008 |
Show/hide table
424-6228 柴油机排气处理液罐总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 6     | 198-9706 螺钉     | 使用以下步骤按图 2 所示的数字顺序 1 到 6 拧紧螺钉: 1. 将螺钉拧紧至扭矩为 5 ± 1 N·m (44 ± 9 lb in)。 2. 再次将螺钉拧紧至扭矩为 5 ± 1 N·m (44 ± 9 lb in)。     |
2     | 1     | 114-0840 螺塞     | 拧紧至扭矩为 11 ± 3 N·m (97 ± 27 lb in)。     |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Air Lines
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Air Inlet Elbow
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
G3306B Generator Sets Carburetor Air/Fuel Ratio - Check/Adjust
390F Excavator Machine Systems Swing Gear and Bearing - Install
390F Excavator Machine Systems Swing Gear and Bearing - Remove
C9.3 Marine Auxiliary Engines Maintenance Interval Schedule - Marine Auxiliary Engine
DE Series Generator Set With Cat C4.4 Engine Product Description
390F Excavator Machine Systems Swing Drive - Remove and Install
2014/04/04 A New Gas Shutoff Valve (GSOV) Is Used for Certain G3508 and G3512 Petroleum Engines {1274, 5479}
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Starting the Engine
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Turbocharger
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
C4.4 Marine Generator Set Heat Exchanger
390F Excavator Machine System Grease Lines
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Fuel Priming Pump and Primary Fuel Filter