Air Inlet Elbow
Show/hide table
图 1 | g03653976 |
典型示例 |
Show/hide table
380-8517 进气弯头总成 和 415-5764 进气弯头总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | -     | 5S-0385 杯塞     | 在装配前,将高强度或高温厌氧法兰密封胶涂覆到孔中。 安装深度为 1.25 ± 0.25 mm (0.049 ± 0.010 in)。     |
2     | 1     | 8T-6757 管塞     | 组装前,将白色 Loctite Breakloose PST 涂覆到螺纹上。     |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
G3306B Generator Sets Carburetor Air/Fuel Ratio - Check/Adjust
390F Excavator Machine Systems Swing Gear and Bearing - Install
390F Excavator Machine Systems Swing Gear and Bearing - Remove
C9.3 Marine Auxiliary Engines Maintenance Interval Schedule - Marine Auxiliary Engine
DE Series Generator Set With Cat C4.4 Engine Product Description
390F Excavator Machine Systems Swing Drive - Remove and Install
2014/04/04 A New Gas Shutoff Valve (GSOV) Is Used for Certain G3508 and G3512 Petroleum Engines {1274, 5479}
2014/05/16 New Air Inlet Valves and Valve Seats Are Used On Certain C27and C32 Industrial Engines {1100, 1101}
C4.4 Marine Generator Set Fuel Manifold (Rail)
C4.4 Marine Generator Set Control Panel - Marine Classification Society (MCS) Control Panel (If Equipped)
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Air Lines
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Starting the Engine
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Turbocharger
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
C4.4 Marine Generator Set Heat Exchanger
390F Excavator Machine System Grease Lines