Turbocharger
Show/hide table
图 1 | g03653967 |
典型示例 |
Show/hide table
392-7918 涡轮增压器总成和 392-7917 涡轮增压器总成的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 4 | 375-2467 法兰锁紧螺母 | 在装配前,使用 Loctite C5A 铜防咬合剂润滑螺纹和轴承表面。
拧紧至扭矩为 |
Show/hide table
图 2 | g03653973 |
392-7914 涡轮增压器总成 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
2 | - | 268-2960 卡箍组件 | 拧紧至扭矩为 |
3 | 1 | 9N-2038 涡轮卡箍组件 | 按照以下步骤拧紧带夹: 1. 将卡箍拧紧至扭矩为 2. 将卡箍松开一至两圈。 3. 再次将卡箍拧紧至扭矩为 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Turbocharger
G3306B Generator Sets Carburetor Air/Fuel Ratio - Check/Adjust
390F Excavator Machine Systems Swing Gear and Bearing - Install
390F Excavator Machine Systems Swing Gear and Bearing - Remove
C9.3 Marine Auxiliary Engines Maintenance Interval Schedule - Marine Auxiliary Engine
DE Series Generator Set With Cat C4.4 Engine Product Description
390F Excavator Machine Systems Swing Drive - Remove and Install
2014/04/04 A New Gas Shutoff Valve (GSOV) Is Used for Certain G3508 and G3512 Petroleum Engines {1274, 5479}
2014/05/16 New Air Inlet Valves and Valve Seats Are Used On Certain C27and C32 Industrial Engines {1100, 1101}
C4.4 Marine Generator Set Fuel Manifold (Rail)
C4.4 Marine Generator Set Control Panel - Marine Classification Society (MCS) Control Panel (If Equipped)
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Fuel Tank
C13, C15, and C18 Tier 4 Final Engines Air Inlet Elbow
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Air Lines
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Starting the Engine
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C4.4 Marine Generator Set Turbocharger
C13, C15, and C18 Tier 4 Final Engines Exhaust Cooler (NRS)
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
C4.4 Marine Generator Set Heat Exchanger