3500B and 3500C Marine Engines Caterpillar


Camshaft

Usage:

3516B 9F2


Illustration 1g03317018

Table 1
Specification for 381-1946 Camshaft Gp 
Item  Qty  Part  Specification Description 
Dimension of groove in a new camshaft for the thrust washer is 8.75 ± 0.05 mm (0.344 ± 0.002 inch)
4N-1650 Dowel  Extension of the dowel is 22.0 ± 0.5 mm (0.87 ± 0.02 inch)
5B-5821 Dowel  Extension of the dowel is 12.0 ± 0.5 mm (0.47 ± 0.02 inch)
7N-3218 Thrust Washer  Thickness of a new thrust washer is 8.50 ± 0.05 mm (0.335 ± 0.002 inch)
Diameter of bearing journal is 91.88 ± 0.02 mm (3.617 ± 0.001 inch)
16  5P-0076 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft)


Illustration 2g03317017

Table 2
Specification for 381-1946 Camshaft Gp 
Item  Qty  Part  Specification Description 
Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (H).
2. Measure base circle (J).
3. Subtract the base circle (J) from the camshaft lobe height (H). The difference is the actual camshaft lobe lift. 
Specified camshaft lobe lift for
Inlet lobe is 13.250 mm (0.5217 inch).
Injector lobe is 13.731 mm (0.5406 inch).
Exhaust lobe is 13.250 mm (0.5217 inch)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.