| |
| Illustration 1 | g02467762 |
|
Partial hydraulic schematic (BLADE DOWN) (1) Blade cylinder (2) Changeover valve (3) Main control valve (4) Blade control valve (5) Relief valve (outer pump) (6) Outer gear pump (7) Hydraulic tank | |
| |
| Illustration 2 | g02468720 |
|
Operator controls (2) Changeover valve | |
Changeover control valve (2) must be in the correct position for the blade to function.
| |
| Illustration 3 | g02468520 |
|
Blade control valve (BLADE DOWN) (8) Cylinder port B (9) Cylinder port A (10) Return passage (11) Spool (12) Center bypass passage (13) Parallel feeder passage | |
Spool (11) has a mechanical linkage which actuates the valve. When the linkage is pushed, spool (11) shifts downward. The pump oil then flows to cylinder port A (9). The oil flows through lines to the head end of the blade cylinder in order to extend the cylinder rod. Return oil in cylinder port B (8) flows through the spool to return passage (10). The oil then returns to the tank.
| |
| Illustration 4 | g02468694 |
|
Blade control valve (BLADE UP) (8) Cylinder port B (9) Cylinder port A (10) Return passage (11) Spool (12) Center bypass passage (13) Parallel feeder passage | |
Spool (11) has a mechanical linkage which actuates the valve. When the linkage is pulled, spool (11) shifts upward. The pump oil then flows to cylinder port B (8). The oil flows through lines to the rod end of the blade cylinder in order to retract the cylinder rod. Return oil in cylinder port A (9) flows through the spool to return passage (10). The oil then returns to the tank.
Refer to the Systems Operation, "Main Control Valve" for more information on the main control valve and the blade control valve.