Quick Coupler - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 141-1785 | Receiving Sleeve As | 1 |
137-8460 | Puller Stud | 1 | |
6V-0113 | Double Acting Cylinder | 1 | |
9U-5346 | Nut | 1 | |
9X-8399 | Washer | 1 | |
B | 3S-6224 | Electric Hydraulic Pump Gp | 1 |
Start By:
- Remove bucket.
Show/hide table
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death. |
- Place quick coupler (1) on a hard level surface.
Show/hide table
Illustration 2 g02473737 - Disconnect hose assemblies (2) and (3).
Show/hide table
Illustration 3 g02473900 - Remove bolts (4).
Show/hide table
Illustration 4 g02473876 - Use Tooling (A) in order to remove pins (5).
Show/hide table
Illustration 1 | g02471493 |
- Install quick coupler (1) in reverse order of removal.
Caterpillar Information System:
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Refrigerant Compressor - Remove and Install
300.9D Mini Hydraulic Excavator Swing Boom Hydraulic System
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Hydraulic System Generator Set - Check and Adjust - 15 kW Version
326F, 329F and 330F Excavators C7.1 Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
300.9D Mini Hydraulic Excavator Blade Hydraulic System
C7.1 Engines For Caterpillar Built Machines Diagnostic Trouble Codes
C7.1 Engines For Caterpillar Built Machines Power Is Intermittently Low or Power Cutout Is Intermittent
300.9D and 300.9D VPS Mini Hydraulic Excavator Boom/Stick/Bucket Combinations
300.9D and 300.9D VPS Mini Hydraulic Excavator Lifting and Tying Down the Machine
300.9D and 300.9D VPS Mini Hydraulic Excavator Bucket - Remove and Install
300.9D and 300.9D VPS Mini Hydraulic Excavator Travel in Water and Mud
300.9D and 300.9D VPS Mini Hydraulic Excavator Operating Technique Information
300.9D Mini Hydraulic Excavator Auxiliary Hydraulic System
M320D2 Wheeled Excavator Hydraulic System Control Valve (Compensator)
G310B, G315B, G320B and G325B Demolition and Sorting Grapples Maintenance Interval Schedule
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System Backup Mode Function
M320D2 Wheeled Excavator Hydraulic System Control Valve (Boom Lowering)
M320D2 Wheeled Excavator Hydraulic System Control Valve (Stick Lowering)
M320D2 Wheeled Excavator Hydraulic System Pilot Control Valve (Stabilizer and Blade)
M320D2 Wheeled Excavator Hydraulic System Cylinders (Boom, Bucket, Stick and VA Boom)
M320D2 Wheeled Excavator Hydraulic System Drift Reduction Valve
M320D2 Wheeled Excavator Hydraulic System Swing Pump
M320D2 Wheeled Excavator Hydraulic System Pump Control (Swing)
M320D2 Wheeled Excavator Hydraulic System Gear Pump (Charge)