Crankshaft Vibration Damper and Pulley - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | -     | Guide Stud M14 x 1.5 by 70 mm     |
1     |
B     | 227-4393     | E18 Torx Socket     | 1     |
- Remove guard assembly (1) .
Show/hide table
Illustration 1 | g02463067 |
- Remove alternator belt (2) .
Show/hide table
Illustration 2 | g02468057 |
Note: The combined weight of the vibration damper and the crankshaft adapter is approximately 22 kg (48 lb). Remove the vibration damper and the crankshaft pulley before the crankshaft adapter is removed from the engine.
- Remove one of bolts (3) and install Tooling (A) .
- Remove the remaining bolts (3) . Remove vibration damper (5) from crankshaft adapter (4) . Remove Tooling (A) .
Show/hide table
Illustration 3 | g02468076 |
- Use a suitable tool to prevent the crankshaft from rotating. Use Tooling (B) to remove Torx screws (6) . Remove crankshaft adapter (7) .
Show/hide table
Illustration 4 | g02468078 |
Installation Procedure
- Install the vibration damper and the pulley in reverse order.
- Tighten Torx screws (6) to a torque of 40 N·m (3 lb ft) plus an additional 120 degrees.
- Evenly space bolts (3) on vibration damper (4) . Tighten bolts (3) to a torque of 115 N·m (85lb ft).
Caterpillar Information System:
300.9D Mini Hydraulic Excavator Blade Hydraulic System
C7.1 Engines For Caterpillar Built Machines Diagnostic Trouble Codes
C7.1 Engines For Caterpillar Built Machines Power Is Intermittently Low or Power Cutout Is Intermittent
300.9D and 300.9D VPS Mini Hydraulic Excavator Boom/Stick/Bucket Combinations
300.9D and 300.9D VPS Mini Hydraulic Excavator Lifting and Tying Down the Machine
300.9D and 300.9D VPS Mini Hydraulic Excavator Bucket - Remove and Install
300.9D and 300.9D VPS Mini Hydraulic Excavator Travel in Water and Mud
300.9D and 300.9D VPS Mini Hydraulic Excavator Operating Technique Information
300.9D and 300.9D VPS Mini Hydraulic Excavator Hammer Operation - If Equipped
300.9D and 300.9D VPS Mini Hydraulic Excavator Rubber Belt Track Operation
300.9D and 300.9D VPS Mini Hydraulic Excavator Stopping the Machine
300.9D and 300.9D VPS Mini Hydraulic Excavator Adjustable Gauge Undercarriage Frame
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Hydraulic System Generator Set - Check and Adjust - 15 kW Version
300.9D Mini Hydraulic Excavator Swing Boom Hydraulic System
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Refrigerant Compressor - Remove and Install
326F, 329F and 330F Excavators Machine Systems Quick Coupler - Remove and Install
300.9D Mini Hydraulic Excavator Auxiliary Hydraulic System
M320D2 Wheeled Excavator Hydraulic System Control Valve (Compensator)
G310B, G315B, G320B and G325B Demolition and Sorting Grapples Maintenance Interval Schedule
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System Backup Mode Function
M320D2 Wheeled Excavator Hydraulic System Control Valve (Boom Lowering)
M320D2 Wheeled Excavator Hydraulic System Control Valve (Stick Lowering)
M320D2 Wheeled Excavator Hydraulic System Pilot Control Valve (Stabilizer and Blade)
M320D2 Wheeled Excavator Hydraulic System Cylinders (Boom, Bucket, Stick and VA Boom)