Cylinder Head
Show/hide table
图 1 | g02557638 |
缸盖顶视图 |
Show/hide table
331-2478 缸盖总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
-     | 26     | 242-1811 螺栓     | 组装前,利用 4C-5593 螺纹润滑剂 润滑螺栓螺纹和垫圈两侧。 采用以下步骤拧紧螺栓: 1. 按数字顺序将螺栓 1 至螺栓 26 拧紧至 170 ± 10 N·m (125 ± 7 lb ft) 2. 按照数字顺序将螺栓 1 至螺栓 26 再次拧紧至扭矩为 170 ± 10 N·m (125 ± 7 lb ft) 3. 按数字顺序将螺栓 1 到螺栓 26 再次转动 120 ± 5 度 4. 将螺栓 1 到螺栓 26 松开至 0 N.m (0 lb ft) 5. 按数字顺序将螺栓 1 至螺栓 26 拧紧至 170 ± 10 N·m (125 ± 7 lb ft) 6. 按照数字顺序将螺栓 1 至螺栓 26 再次拧紧至扭矩为 170 ± 10 N·m (125 ± 7 lb ft) 7. 按数字顺序将螺栓 1 到螺栓 26 再次转动 120 ± 5 度 8. 按数字顺序将螺栓 27 至 34 拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)     |
-     | 8     | 210-4460 螺栓     | |
组装前,缸体的顶部密封垫端面、缸套和缸盖的底部密封垫端面必须没有机油、燃油、水和其他污染物。     |
Show/hide table
图 2 | g02558076 |
缸盖顶视图 |
Show/hide table
图 3 | g02558157 |
Show/hide table
项目     | 数量     | 零件     | 技术规格说明     |
-     | 35     | 3B-0623 杯塞     | 安装深度 (M) 为 1.5 ± 0.5 mm (0.06 ± 0.02 in)     |
安装深度 (N) 为 3.0 ± 1.0 mm (0.12 ± 0.04 in) |
|||
安装前,将 Loctite 11358 涂覆到杯塞的孔中。     |
Caterpillar Information System:
793F Off-Highway Truck Machine Systems Lubrication Pump (Automatic) - Assemble
793F Off-Highway Truck Machine Systems Lubrication Pump (Automatic) - Disassemble
TH48-E80 Petroleum Transmission Component Location
797F Off-Highway Truck Power Train Oil Filter and Base (Differential) - Remove and Install
Installing the Package Mounted Radiator for the C175 Generator Set Engine {1353, 1356} Installing the Package Mounted Radiator for the C175 Generator Set Engine {1353, 1356}
3516C Locomotive Engine and Generator Set Configuration Parameters
2010/04/02 Information on the New Valve Recession Tool Gp that Is Used on All G3500 Commercial Engines {0701, 1105}
EMCP4.3/4.4 Parallel Operation - EMCP 4.4
3516C Locomotive Engine Fuel Tank Water and Sediment - Drain
TH55FT-E70 and TH55FT-E90 Transmissions Reference Material
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold Shield
TH48-E80 Petroleum Transmission S·O·S Information
G3520E Generator Set Engines Alternator Mounting
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059} Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
G3520E Generator Set Engines Temperature Sensor
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Wiring
797F Off-Highway Truck Power Train Oil Filter and Base (Final Drive) - Remove and Install
120 Motor Graders Bypass Valve (Hydraulic Oil Cooler)
C32 Marine Generator Set Model View Illustrations
C13 Industrial Engines Electric Starting Motor
C18 Industrial Engines Engine Oil and Filter - Change