Electric Starting Motor
Show/hide table
Illustration 1 | g02149997 |
When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... Clockwise
Specifications
- System voltage ... 12 V
- Minimum operating voltage ... 8 V
No load conditions
- Minimum speed with no load ... 2000 rpm
- Maximum current with no load ... 200 amp
- Voltage ... 11.5 V
- Maximum current with no load ... 200 amp
(1) Battery terminal
- Maximum number of cable or wire terminals between the nuts ... 3
- Tighten the nut on the battery terminal to the following torque. ...
25 ± 5 N·m (18 ± 4 lb ft) - Tighten the nut on the battery terminal to the following torque. ...
(2) Switch terminal
- Tighten the nut on the switch terminal to the following torque. ...
2.5 ± 0.5 N·m (22 ± 4 lb in)
(3) Ground terminal
- Tighten the nut on the ground terminal to the following torque. ...
25 ± 5 N·m (18 ± 4 lb ft)
Caterpillar Information System:
C32 Marine Generator Set Model View Illustrations
120 Motor Graders Bypass Valve (Hydraulic Oil Cooler)
797F Off-Highway Truck Power Train Oil Filter and Base (Final Drive) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Wiring
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
G3520E Generator Set Engines Temperature Sensor
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059} Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
G3520E Generator Set Engines Alternator Mounting
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
793F Off-Highway Truck Machine Systems Lubrication Pump (Automatic) - Assemble
C18 Industrial Engines Engine Oil and Filter - Change
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - High Pressure, For Series Turbocharger Applications
2010/08/10 A New O-ring Seal Is Now Available for Certain Marine Engines {1059, 1355, 1380, 1393}
C13, C15, and C18 Tier 4 Final Engines Front Housing and Covers
C27 and C32 Tier 4 Engines Camshaft
C11 and C13 Engines Engine Mounting
C11 and C13 Engines Engine Oil Pump - Gerotor Pump
Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206} Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206}
797F and 797F XQ Off-Highway Trucks Machine Systems Oil Cooler Core (Brake) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
2010/09/13 A New Rocker Arm Assembly Is Available for Certain Machine Engines {1123}