Camshaft
Show/hide table
Illustration 1 | g01427361 |
(1) The end of the camshaft that is marked "F" must be placed at the front of the engine. Lubricate the camshaft bearings, the journals, and the lobes with a 50/50 mixture of 8T-2998 Lubricant and clean engine oil.
Show/hide table
Illustration 2 | g01416694 |
(2) Exhaust lobe (3) Injector lobe (4) Inlet lobe |
(A) Diameter of the camshaft journal ... 84.85 ± 0.02 mm (3.341 ± 0.001 inch)
Show/hide table
Illustration 3 | g01416960 |
(B) Camshaft lobe lift
Use the following procedure in order to determine the camshaft lobe lift:
- Measure the camshaft lobe height (C) .
- Measure the base circle (D) .
- Subtract the base circle measurement in Step 2 from the camshaft lobe height in Step 1. The difference is the actual camshaft lobe lift (B) .
Specified camshaft lobe lift
- Inlet lobe ... 9.43115 mm (0.37130 inch)
- Exhaust lobe ... 8.515 mm (0.3352 inch)
- Injector lobe (right bank) ... 10.655 mm (0.41949 inch)
- Injector lobe (left bank) ... 10.644 mm (0.41905 inch)
- Exhaust lobe ... 8.515 mm (0.3352 inch)
The maximum permissible difference between the actual camshaft lobe lift in Step 3 and the specified camshaft lobe lift is 0.13 mm (0.005 inch).
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Front Housing and Covers
2010/08/10 A New O-ring Seal Is Now Available for Certain Marine Engines {1059, 1355, 1380, 1393}
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - High Pressure, For Series Turbocharger Applications
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications
C18 Industrial Engines Engine Oil and Filter - Change
C13 Industrial Engines Electric Starting Motor
C32 Marine Generator Set Model View Illustrations
120 Motor Graders Bypass Valve (Hydraulic Oil Cooler)
797F Off-Highway Truck Power Train Oil Filter and Base (Final Drive) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Wiring
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
C11 and C13 Engines Engine Mounting
C11 and C13 Engines Engine Oil Pump - Gerotor Pump
Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206} Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206}
797F and 797F XQ Off-Highway Trucks Machine Systems Oil Cooler Core (Brake) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
2010/09/13 A New Rocker Arm Assembly Is Available for Certain Machine Engines {1123}
2010/03/29 A New Rocker Arm Assembly Is Available for C15 Engines {1123}
2010/03/31 A New Rocker Arm Assembly Is Available for C15 Engines {1123}
C15 and C18 Engines Engine Rating Definitions
C18 Industrial Engines Configuration Parameters
C15 and C18 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install - For Series Turbocharger Applications
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0585 - FMI 02