Alternator Mounting
Show/hide table
| |
| Illustration 1 | g02123393 |
|
Left side view | |
Show/hide table
| Specification for 352-8947 Alternator Mounting Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 235-2484 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 2 | - | - | Tighten the pulley retaining nut to |
| - | - | - | Maximum misalignment between 300-8570 Pulley As (5) and 7E-4839 Pulley (3) is 0.4 degrees. |
| 4 | - | - | Adjust the belt tension of the serpentine belt according to the 197-9087 Belt Tension Chart. |
Show/hide table
| Specification for 197-9087 Belt Tension Chart | |||||||
| Size of Belt | Width of Belt | Gauge Reading | Gauge (Force) | Belt Tension (Frequency)
“Initial”(1) |
Belt Tension (Frequency)
“Used”(2)(3) |
Gauge (Frequency) | |
| Belt Tension (Force)
“Initial” (1) |
Belt Tension (Force)
“Used” (2)(3) |
Basic Gauge Number | Gauge Number | ||||
| 8 - RIB
POLY - RIB |
|
|
|
BT-33-109 | 98 ± 10 HZ | 76 ± 8 HZ | Clavis Type 14 |
| Do not use the belt tension chart for belts with tensioners that are spring loaded. | |||||||
| Measure the tension of the belt that is farthest from the engine. | |||||||
Show/hide table
| (1) | Belt tension “lnitial” is for a new belt. |
| (2) | Belt tension “Used” is for a belt that has operated for 30 minutes or more of operation at the rated speed. |
| (3) | If a belt falls below the “Used” belt tension, the belt should be tightened again to the high side of the “Used” belt tension. |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
793F Off-Highway Truck Machine Systems Lubrication Pump (Automatic) - Assemble
793F Off-Highway Truck Machine Systems Lubrication Pump (Automatic) - Disassemble
TH48-E80 Petroleum Transmission Component Location
797F Off-Highway Truck Power Train Oil Filter and Base (Differential) - Remove and Install
Installing the Package Mounted Radiator for the C175 Generator Set Engine {1353, 1356} Installing the Package Mounted Radiator for the C175 Generator Set Engine {1353, 1356}
3516C Locomotive Engine and Generator Set Configuration Parameters
2010/04/02 Information on the New Valve Recession Tool Gp that Is Used on All G3500 Commercial Engines {0701, 1105}
EMCP4.3/4.4 Parallel Operation - EMCP 4.4
3516C Locomotive Engine Fuel Tank Water and Sediment - Drain
TH55FT-E70 and TH55FT-E90 Transmissions Reference Material
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold Shield
Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059} Salvage of Weld on Water-Cooled Exhaust Manifold for 3500 Series Engines {0679, 1059}
G3520E Generator Set Engines Temperature Sensor
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22 Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Wiring
797F Off-Highway Truck Power Train Oil Filter and Base (Final Drive) - Remove and Install
120 Motor Graders Bypass Valve (Hydraulic Oil Cooler)
C32 Marine Generator Set Model View Illustrations
C13 Industrial Engines Electric Starting Motor
C18 Industrial Engines Engine Oil and Filter - Change
C15 and C18 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications