Gear Motor (Hydraulic Fan) - Assemble
Assembly Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | QTY |
| A | 1P-1857 | Retaining Ring Pliers | 1 |
| B | 1P-0510 | Driver Gp | 1 |
- Use Tooling (B) and install seal (27) in end cover (24) .
Show/hide table
 | |
| Illustration 1 | g02073645 |
- Use Tooling (A) and install retaining ring (26) in end housing (24) .
- Use Tooling (B) and install seal (25) in end cover (24) .
Show/hide table
 | |
| Illustration 2 | g02073639 |
- Connect cover (24) and plate (23) .
Show/hide table
 | |
| Illustration 3 | g02073638 |
- Install coupler (22) .
- Install seal (21) in housing (17) .
Show/hide table
 | |
| Illustration 4 | g02072474 |
- Install seal (20) and back up ring (19) on bushing (18) .
Show/hide table
 | |
| Illustration 5 | g02072473 |
- Install bushing (18) and housing (17) .
Show/hide table
 | |
| Illustration 6 | g02072462 |
- Install driven gear (16) and drive gear (15) .
Show/hide table
 | |
| Illustration 7 | g02072461 |
- Install seal (14) and back up ring (13) on bushing (12) .
Show/hide table
 | |
| Illustration 8 | g02072460 |
- Install bushing (12) .
Show/hide table
 | |
| Illustration 9 | g02072459 |
- Install end cover (10) and bolts (9). Tighten bolts (9) to a torque of 45 N·m (33 lb ft).
Show/hide table
 | |
| Illustration 10 | g02072457 |
- Install back up ring (8) and back up ring (6) on spool (3) .
Show/hide table
 | |
| Illustration 11 | g02072456 |
- Install O-ring seal (9), O-ring seal (5), and O-ring seal (4) .
- Install spool (3). Tighten spool (3) to a torque of 30 N·m (22 lb ft).
Show/hide table
 | |
| Illustration 12 | g02072455 |
- Install coil (2), the O-ring seal, and nut (1) .
Show/hide table
 | |
| Illustration 13 | g02072453 |
End By: Install the gear motor (hydraulic fan). Refer to Disassembly and Assembly, "Gear Motor (Hydraulic Fan) - Install".
Caterpillar Information System:
AP555E and BG555E Asphalt Pavers C4.4 Engine Supplement Gear Motor (Hydraulic Fan) - Disassemble
C175-16 Engine for 795F Series AC Off-Highway Trucks Crankcase Breather
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Electronic Control System MID 075 - CID 0517 - FMI 04
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders All Wheel Drive Electronic Control System MID 075 - CID 0517 - FMI 03
AP500E and BG500E Asphalt Pavers Propel System Front Wheel Assist - Four-Wheel Drive
2010/01/26 Rework the Axle Oil Cooling Fans On Certain R1600G Load Haul Dump Machines {1365}
2010/01/26 Improved Routing for the Wiring Harness on the A/C Compressor {1403, 1408, 1802}
2010/05/06 A New Pump Control Valve Group For Steering Has Been Introduced for Articulated Trucks {5455}
527 Track-Type Skidder Transmission Oil - Change
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System General Information
Supplemental Parts Information for the USN Seabee 770 Off-Highway Truck{1000, 1107, 4203, 7000, 7258, 7269, 7405, 7557} Supplemental Parts Information for the USN Seabee 770 Off-Highway Truck{1000, 1107, 4203, 7000, 7258, 7269, 7405, 7557}
Improved Output Transfer Case and Bearings Are Now Used on Certain Landfill Compactors and Wheel Dozers {3030, 3075, 3159} Improved Output Transfer Case and Bearings Are Now Used on Certain Landfill Compactors and Wheel Dozers {3030, 3075, 3159}
Procedure for Extending/Retracting the PM-102 Right Rear Leg{7224} Procedure for Extending/Retracting the PM-102 Right Rear Leg{7224}
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0967 - FMI 02
2010/02/11 New Tie Straps Are Added to The Hoses For The Swing Frame {5057}
D8T Track-Type Tractor Power Train Power Train Oil Pump
PL83 and PL87 Pipelayer Systems Transmission
PL83 and PL87 Pipelayer Systems Transmission Hydraulic Control
PL83 and PL87 Pipelayer Systems Differential Steering System
D8T Track-Type Tractor Transfer and Bevel Gears
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 081 - CID 1089 - FMI 09
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 081 - CID 1089 - FMI 14
2010/01/26 A New Brake Spring Assembly is Now Used {4251, 4267}
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System MID 081 - CID 1428 - FMI 02