Engine Oil Cooler - Install
Installation Procedure
- Slide engine oil cooler (3) to the front of the engine. Position engine oil cooler (3) onto the cylinder block.
Show/hide table
Illustration 1 | g01013646 |
- Install bolts (9) on the oil filter base.
- Connect harness assembly (7) .
- Connect hose (8) and hose (10) .
- Attach a suitable lifting device to engine oil cooler (3). The weight of the engine oil cooler (3) is approximately 23 kg (51 lb).
Show/hide table
Illustration 2 | g01898674 |
- Position engine oil cooler (3) on the engine.
- Install bonnet (1) .
- Install bolts (5) and (6) .
- Connect hose (4) .
- Connect hose assembly (2) .
End By: Fill the Engine Oil. Refer to the Operation and Maintenance Manual, "Refill Capacities".
Caterpillar Information System:
C13 Engine Engine Oil Cooler - Remove
C13 Engine Engine Oil Filter Base - Install
C13 Engine Engine Oil Filter Base - Assemble
C13 Engine Engine Oil Filter Base - Disassemble
C13 Engine Engine Oil Filter Base - Remove
C13 Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine Inlet and Exhaust Valves - Remove and Install
C13 Engine Inlet and Exhaust Valve Springs - Remove and Install
C9 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
PM3516 Power Modules Fumes Disposal Filter Element - Replace
2009/04/20 A New Connector Assembly and Hose Assembly are Now Used on Certain Caterpillar Products {5079, 5117}
C13 Engine Engine Oil Pump - Remove
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Assemble
C13 Engine Engine Oil Pump - Install
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C13 Engine Water Pump - Remove
C13 Engine Water Pump - Install
C13 Engine Water Temperature Regulator - Remove and Install
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
C13 Engine Flywheel - Remove
C13 Engine Flywheel - Install