Removal Procedure
 |
Sulfuric Acid Burn Hazard, may cause serious personal injury. The clean gas induction (CGI) solenoid valve may contain a small amount of sulfuric acid. The use of fuel with sulfur levels greater than 15 ppm may increase the amount of sulfuric acid formed. The sulfuric acid may spill from the CGI cooler during service of the engine and may travel to other downstream components. Always wear the appropriate personal protective equipment (PPE) that is noted on a material safety data sheet (MSDS) for sulfuric acid. Always follow the directions for first aid that are noted on a material safety data sheet (MSDS) for sulfuric acid. |
 |
- Loosen hose clamps (2). Disconnect hose (1) .
 | |
| Illustration 1 | g01265940 |
- Disconnect hose assembly (3) .
- Disconnect hose assembly (4) .
- Disconnect harness assembly (5) .
- Loosen hose clamps (6). Disconnect hose (7) .
- Remove bolts (9) and remove solenoid valve (8) .
Installation Procedure
|
Sulfuric Acid Burn Hazard, may cause serious personal injury. The clean gas induction (CGI) solenoid valve may contain a small amount of sulfuric acid. The use of fuel with sulfur levels greater than 15 ppm may increase the amount of sulfuric acid formed. The sulfuric acid may spill from the CGI cooler during service of the engine and may travel to other downstream components. Always wear the appropriate personal protective equipment (PPE) that is noted on a material safety data sheet (MSDS) for sulfuric acid. Always follow the directions for first aid that are noted on a material safety data sheet (MSDS) for sulfuric acid. |
|
- Position solenoid valve (8) and install bolts (9) .
| | |
| Illustration 2 | g01265940 |
- Connect hose (7). Tighten hose clamps (6) .
- Connect harness assembly (5) .
- Connect hose assembly (4) .
- Connect hose assembly (3) .
- Connect hose (1). Tighten hose clamps (2) .