Injection Actuation Pressure Sensor
Show/hide table
Illustration 1 | g01266129 |
(1) Sensor assembly
Tighten the sensor assembly to the following torque. ... 10 ± 2 N·m (90 ± 18 lb in)
(2) Plug
Caterpillar Information System:
C7 On-Highway Engine Air Inlet Cover - Remove and Install
2006/08/07 A New Oil Pump for the Hydrax System is Used {1716, 5073}
C27 and C32 Engines for Caterpillar Built Machines Camshaft - Install - C27
C13 Engine Boost Pressure Sensor - Remove and Install
C7 On-Highway Engine Solenoid Valve (ARD Main Fuel) - Remove and Install
BA-921 Bendix Air Compressor Air Compressor is Noisy
C175-16 and C175-20 Generator Set Engines Valve Mechanism
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Install - C27
C9 On-highway Engine Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove - C27
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install - C27
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Overview
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Abbreviations and Acronyms
C13 On-highway Engine Fuel Priming Pump
2006/07/01 A New Field Service Kit for Alternators is Now Available {1405, 7555}
C15 On-Highway Engine Fuel Filter Base
3500B Industrial Engines with the ADEM 3 Electronic Control Module Intermediate Speed Switch
C13 Engine Air Compressor - Remove and Install
C7 On-Highway Engine Clean Gas Induction Valve - Assemble
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Configuration
TH48-E70 Petroleum Transmission Lifting and Tying Down the Transmission
C7 On-Highway Engine Flywheel Housing - Remove and Install
C7 On-Highway Engine Coolant Temperature Sensor - Remove and Install