Hydraulic Hand Control - Assemble
Assembly Procedure
- Position lever (11) and install roll pin (12) .
Show/hide table
Illustration 1 | g01235119 |
- Install handle (10) .
- Install pawl lever (9) and latches (8) .
Show/hide table
Illustration 2 | g01235118 |
- If handle assembly (7) was removed then lower plate (3) and roll pin (4) will need to be installed.
Show/hide table
Illustration 3 | g01235117 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Install springs (6) and spring guides (5) .
- Install bolts (2) .
Show/hide table
Illustration 4 | g01205776 |
- Install cover (1) .
Show/hide table
Illustration 5 | g01205773 |
End By: Install the hydraulic hand control. Refer to Disassembly and Assembly, "Hydraulic Hand Control - Install".
Caterpillar Information System:
PP120 and PH126 Power Pack and Hammer Hydraulic Hand Control - Disassemble
M325D MH Material Handler Air Conditioning and Heating Control
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Joystick) - Disassemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Remove
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Specifications
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Main) - Test and Adjust
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Pilot) - Test and Adjust
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Cylinder Speed - Check
3516B Off-Highway Trucks Pulse Width Modulated Sensor
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
320D RR Excavator and 320D RR Forest Machine Hydraulic System Operational Checks
320D and 323D Excavators Hydraulic System Travel on Level Ground - Test
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Joystick) - Assemble
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
320D RR Excavator and 320D RR Forest Machine Hydraulic System Travel on Level Ground - Test - Optional Test
320D and 323D Excavators Hydraulic System Swing Speed and Overswing on Level Ground - Check
320D and 323D Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Pilot) - Remove
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System General Information
320D RR Excavator and 320D RR Forest Machine Hydraulic System Cylinder Drift - Check - Loaded Bucket
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System System Operation