Hydraulic Hand Control - Disassemble
Disassembly Procedure
Start By:
- Remove the hydraulic hand control. Refer to Disassembly and Assembly, "Hydraulic Hand Control - Remove".
- Remove cover (1) .
Show/hide table
Illustration 1 | g01205773 |
- Remove bolts (2) .
Show/hide table
Illustration 2 | g01205776 |
- If handle assembly (7) will be removed then remove roll pin (4) and lower plate (3) at this time.
Show/hide table
Illustration 3 | g01235117 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove spring guides (5) and springs (6) .
- Remove latches (8) and pawl lever (9) .
Show/hide table
Illustration 4 | g01235118 |
- Remove handle (10) .
Show/hide table
Illustration 5 | g01235119 |
- Remove roll pin (12) in order to remove lever (11) .
Caterpillar Information System:
M325D MH Material Handler Air Conditioning and Heating Control
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Joystick) - Disassemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Remove
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Specifications
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Main) - Test and Adjust
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Pilot) - Test and Adjust
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Cylinder Speed - Check
3516B Off-Highway Trucks Pulse Width Modulated Sensor
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
304C CR and 305C CR Mini Hydraulic Excavators Hydraulic System Swing Speed and Overswing on Level Ground - Check
PP120 and PH126 Power Pack and Hammer Hydraulic Hand Control - Assemble
320D RR Excavator and 320D RR Forest Machine Hydraulic System Operational Checks
320D and 323D Excavators Hydraulic System Travel on Level Ground - Test
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Joystick) - Assemble
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
320D RR Excavator and 320D RR Forest Machine Hydraulic System Travel on Level Ground - Test - Optional Test
320D and 323D Excavators Hydraulic System Swing Speed and Overswing on Level Ground - Check
320D and 323D Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Pilot) - Remove
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System General Information
320D RR Excavator and 320D RR Forest Machine Hydraulic System Cylinder Drift - Check - Loaded Bucket