E030 High Transmission Oil Temperature Warning
Conditions Which Generate This Code:
The transmission oil temperature has exceeded the trip point. Refer to Troubleshooting, "Event Codes" for the trip point.
System Response:
The Electronic Control Module (ECM) will log the event.
- There are no performance effects.
Test Step 1. Check the Transmission
Refer to the information that is provided by the OEM for the transmission.
Results:
- OK - There is a problem with the transmission.
Repair: Make the necessary repairs. Verify that the problem is resolved.
STOP
Caterpillar Information System:
C32 Marine and Marine Generator Set Engines Cooling System - Check - Overheating
3508C, 3512C and 3516C Marine Engines Crankshaft Front Seal and Wear Sleeve - Install
3508C, 3512C and 3516C Marine Engines Crankshaft Rear Seal and Wear Sleeve - Install
3126B Industrial Engines E025 High Inlet Air Temperature Derate
3406E, C12, C15 and C18 Marine Engines E017 High Engine Coolant Temperature Warning
3406E, C12, C15 and C18 Marine Engines E015 High Engine Coolant Temperature Derate
2005/01/17 Correction to Engine Speed/Timing Sensor-Calibrate {1912}
3126B Industrial Engines E004 Engine Overspeed Shutdown
3176C and 3196 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
3500B Marine Propulsion Engines Heat Exchanger - Inspect
3500B Marine Propulsion Engines Sea Water Strainer - Clean/Inspect
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Install
3126B Industrial Engines E039 Low Engine Oil Pressure Derate
3406E, C12, C15 and C18 Marine Engines E053 Low Fuel Pressure Warning
C27 and C32 Generator Set Engines E057 Low Engine Coolant Level Derate
C27 and C32 Generator Set Engines E059 Low Engine Coolant Level Warning
3406E, C12, C15 and C18 Marine Engines E113 High Transmission Oil Pressure
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cooling System - Test
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Crankshaft Rear Seal and Wear Sleeve - Remove
C32 Marine Engines Fuel Level Sensor Circuit - Test
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Water Temperature Regulator - Test
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Water Pump - Inspect
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Piston Ring Groove - Inspect
C32 Marine Engine Sensors and Electrical Components