Specifications
A layout of the Product Link module is shown in illustration 1.
Show/hide table
Illustration 1 | g01085630 |
Drawing of Product Link PL102C Module |
Caterpillar Information System:
Product Link - PL102C Commands
2004/09/01 A New Aftercooler Core is Used {1063, 1064}
2012/11/09 Improved Sealing for the Turbocharger {1052, 1065}
2004/07/01 Extending Service Life of the Turbocharger {1052}
2004/10/01 A New Fuel Injector Reduces the Amount of Soot in the Engine Oil {1251, 1254, 1290, 1713}
3408B and 3408C Industrial and Marine Engines Vibration Damper and Pulley
C7 Urban Transit Bus Engines Turbocharger - Inspect
3176C and 3196 Engines for Caterpillar Built Machines Water Temperature Regulator
797 Off-Highway Truck Air Inlet System - Test/Inspect
C11 and C13 Engines for Caterpillar Built Machines Electrical System
3500B Engines for Caterpillar Built Machines General Information (Air/Electric Starting System)
G3408 and G3412 Engines Cylinder Head
G3500B Engines Overhaul (In-Frame)
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065} Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
G3520B Industrial Engine Analog Sensor Signal
C11 and C13 Petroleum Engines Cooling System
C27 and C32 Engines Engine Valve Lash - Inspect/Adjust
G3520B Industrial Engine Cat Data Link
G3306B Generator Sets Product Lifting
G3500 Generator Sets Product Storage
2004/09/01 An Improved Rocker Arm Base and an Improved Seal for the Rocker Arm Base are Now Used {1123, 1123}
C27 and C32 Engines Cylinder Liner Projection - Inspect
C9 Marine Engines and C9 Marine Generator Sets Belt Tensioner
G3406 Engine Emergency Stopping