Emergency Stopping
Show/hide table
| 注意 |
|---|
|
紧急停机控制装置只用于紧急情况。 切勿把紧急停机装置或控制装置用于正常的停机过程。 |
在发动机停机之后，确保为发动机运行提供外部支持的所有系统是安全可靠的。
Show/hide table
| 注意 |
|---|
|
在找到迫使发动机紧急停机的问题并予以纠正以前，不要起动发动机。 |
按紧急停机按钮可能造成未燃烧气体残留在空气进气管和排气管里。
Show/hide table
 |
|
当发动机被起动时，进排气系统里残存的燃气可能被点燃。 可能造成人身伤害和/或财产损失。 起动一台含未燃烧的燃气的发动机之前，从进排气系统清除这些未燃烧的燃气。 参阅"起动发动机"有关清除未燃烧燃气的章节。 |
Show/hide table
| |
| 图 1 | g00520710 |
|
接线盒上的紧急停机按钮 | |
发动机正常运转时，接线盒上的紧急停机按钮处于弹出位置。 需要紧急停机时，按下紧急停机按钮。 必须将此按钮复位之后才能起动发动机。
顺时针旋转该按钮，将其复位。 弹簧加载的按钮会回到弹出位置。
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Belt Tensioner
C27 and C32 Engines Cylinder Liner Projection - Inspect
2004/09/01 An Improved Rocker Arm Base and an Improved Seal for the Rocker Arm Base are Now Used {1123, 1123}
G3500 Generator Sets Product Storage
G3306B Generator Sets Product Lifting
G3520B Industrial Engine Cat Data Link
C27 and C32 Engines Engine Valve Lash - Inspect/Adjust
C11 and C13 Petroleum Engines Cooling System
G3520B Industrial Engine Analog Sensor Signal
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065} Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
G3500B Engines Overhaul (In-Frame)
Product Link - PL102C Specifications
C11 and C13 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Test
C9 Marine Engines and C9 Marine Generator Sets Alternator and Regulator
3406E and C15 Marine Engines Electronic Control System Components
C11 and C13 Petroleum Engines Fuel System
2004/07/26 Special Instructions Are No Longer Announced In the Service Magazine {1000, 7000}
2004/07/01 Reusability of Connecting Rods {1218}
Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
C13, C15, and C18 Tier 4 Final Engines Turbocharger
G3500B Engines Cold Weather Starting
PMG3516 Power Module Maintenance Interval Schedule
PMG3516 Power Module Refill Capacities and Recommendations