Turbocharger
Show/hide table
图 1 | g01424863 |
典型实例 |
(1) 压缩机卡箍组件的扭矩 ...
按照以下步骤拧紧涡轮卡箍组件 ( 2):
- 拧紧涡轮卡箍组件至
18.1 N·m (160.2 lb in) 。 - 松开涡轮卡箍组件至
5.6 N·m (49.6 lb in) 。 - 再次拧紧涡轮卡箍组件至
13.5 ± 1 N·m (119.5 ± 8.9 lb in) 。
废气旁通阀设定 ...
Caterpillar Information System:
Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
2004/07/01 Reusability of Connecting Rods {1218}
2004/07/26 Special Instructions Are No Longer Announced In the Service Magazine {1000, 7000}
C11 and C13 Petroleum Engines Fuel System
3406E and C15 Marine Engines Electronic Control System Components
C9 Marine Engines and C9 Marine Generator Sets Alternator and Regulator
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Test
C11 and C13 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
G3406 Engine Emergency Stopping
C9 Marine Engines and C9 Marine Generator Sets Belt Tensioner
C27 and C32 Engines Cylinder Liner Projection - Inspect
2004/09/01 An Improved Rocker Arm Base and an Improved Seal for the Rocker Arm Base are Now Used {1123, 1123}
G3500B Engines Cold Weather Starting
PMG3516 Power Module Maintenance Interval Schedule
PMG3516 Power Module Refill Capacities and Recommendations
3126B and 3126E Truck Engines Electric Starting Motor
C9 Marine Generator Set Engines General Information
C9 Marine Generator Set Engines Electronic Control System Components
3508B, 3512B, and 3516B High Displacement Generator Sets Electrical System
G3520B Industrial Engine Compressor Bypass
C27 and C32 Engines Lubrication System
G3520B Industrial Engine Desired Speed Input (4 - 20 mA)
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Valve Mechanism
G3520B Industrial Engine Detonation Sensors