Water Temperature Regulator
Show/hide table
 | |
| Illustration 1 | g01399583 |
Typical example | |
Start to open temperature ... 87 to 90 °C (189 to 194 °F)
Fully open temperature ... 98 °C (208 °F)
(A) Minimum opening distance at 98 °C (208 °F) ... 10.4 mm (0.41 inch)
Maximum time from fully closed position at 85 °C (185 °F) to fully open position at 100 °C (212 °F) ... Three minutes
Maximum time from fully open position at 100 °C (212 °F) to fully closed position at 85 °C (185 °F) ... Six minutes
Caterpillar Information System:
797 Off-Highway Truck Air Inlet System - Test/Inspect
C11 and C13 Engines for Caterpillar Built Machines Electrical System
3500B Engines for Caterpillar Built Machines General Information (Air/Electric Starting System)
G3408 and G3412 Engines Cylinder Head
C32 Marine Engine Model View Illustrations
G3520B Industrial Engine +5V Sensor Voltage Supply
C27 and C32 Engines Basic Engine
3500B Engines for Caterpillar Built Machines Radiator and Cooling System - Test
C27 and C32 Engines Air Inlet and Exhaust System
2004/08/01 New Lubricant for the Fan Drive {0645, 1359}
2004/07/01 New Lubricant for the Fan Drive {0645, 1359}
2004/06/28 Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
C7 Urban Transit Bus Engines Turbocharger - Inspect
3408B and 3408C Industrial and Marine Engines Vibration Damper and Pulley
2004/10/01 A New Fuel Injector Reduces the Amount of Soot in the Engine Oil {1251, 1254, 1290, 1713}
2004/07/01 Extending Service Life of the Turbocharger {1052}
2012/11/09 Improved Sealing for the Turbocharger {1052, 1065}
2004/09/01 A New Aftercooler Core is Used {1063, 1064}
Product Link - PL102C Commands
Product Link - PL102C Specifications
G3500B Engines Overhaul (In-Frame)
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065} Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
G3520B Industrial Engine Analog Sensor Signal
C11 and C13 Petroleum Engines Cooling System