Gear Group (Front) - Remove
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-0510 | 冲头总成 | 1 |
开始:
- 拆下前壳体。 请参阅拆解和组装, "壳体（前） - 拆卸"。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将 1 号活塞设定到压缩冲程的上止点。 请参阅测试和调整, "确定 1 号活塞的上止点"。
Show/hide table
图 1 g01272583 - 为了便于安装，标出每个齿轮的方位。
- 拆下螺栓 (4) 和挡板 (6)。
- 将多轮组件 (3)、惰轮轴 (2) 和止推盘 (1) 从缸体上拆下。
- 利用工具 (A) 将轴承 (5) 从惰轮组件 (3) 上拆下。
- 拆下螺栓 (7)、挡板 (8) 和惰轮组件 (9)。
- 检查惰轮组件 (9) 内轴承的状态。 如果轴承磨损或损坏 , 更换惰轮组件。
Caterpillar Information System:
C15 Petroleum Generator Set Engines Water Pump - Test
C15 Petroleum Generator Set Engines Electronic Unit Injector - Test
Oil Renewal System Troubleshooting
C9 Marine Engines and C9 Marine Generator Sets Fuel Pressure Regulator - Remove and Install
2003/11/01 Improved Remanufactured Electric Starting Motors are Now Available {1453}
G3500 Engines Electronic Service Tools
G3500 Engines Electrical Connectors and Functions
C9 Marine Engines and C9 Marine Generator Sets Fuel Cooler - Remove and Install
EMCP3 Data Link
C32 Marine Engine Crankshaft
C18 Generator set and C18 Marine Engines Rocker Arm and Shaft - Install
C32 Marine Engine Vibration Damper and Pulley
C7 PETROLEUM Petroleum Engine Gear Group (Front) - Install
G3500 Engines Engine Monitoring System
2003/11/01 The Air Shutoff Has Been Improved {1078}
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
C15 Petroleum Generator Set Engines Lubrication System
C15 and C18 Engines for Caterpillar Built Machines Cooling System
C32 Marine Engine Piston and Rings
2003/12/01 A Turbine Type Air Starting Motor Is Now Used on the 3618 Engines {1451}
Electronic Installation Guide{1900} Electronic Installation Guide{1900}
Federal Emissions Warranty Information Federal Emission Control Warranty
G3500 Engines Programming Parameters
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Front)