Fuel Pressure Regulator - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect tube assembly (3).
- Remove fuel pressure regulator (2).
- Remove elbow (1) from the cylinder head. Remove the O-ring seal from the elbow.
Show/hide table
| |
| Illustration 1 | g01033731 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the O-ring seal on the elbow. Install elbow (1) on the cylinder head.
- Install fuel pressure regulator (2).
- Connect tube assembly (3).
Show/hide table
|
| |
| Illustration 2 | g01033731 |
Caterpillar Information System:
2003/11/01 Improved Remanufactured Electric Starting Motors are Now Available {1453}
G3500 Engines Electronic Service Tools
G3500 Engines Electrical Connectors and Functions
C9 Marine Engines and C9 Marine Generator Sets Fuel Cooler - Remove and Install
EMCP3 Data Link
C32 Marine Engine Crankshaft
C18 Generator set and C18 Marine Engines Rocker Arm and Shaft - Install
C32 Marine Engine Vibration Damper and Pulley
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Travel Motor Guard - Remove and Install
Installation of the 5P-4889 O-Ring Seal for the Fuel Transfer Pump{1256} Installation of the 5P-4889 O-Ring Seal for the Fuel Transfer Pump{1256}
C27 and C32 Generator Set Engines Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
Oil Renewal System Troubleshooting
C15 Petroleum Generator Set Engines Electronic Unit Injector - Test
C15 Petroleum Generator Set Engines Water Pump - Test
C7 PETROLEUM Petroleum Engine Gear Group (Front) - Remove
C7 PETROLEUM Petroleum Engine Gear Group (Front) - Install
G3500 Engines Engine Monitoring System
2003/11/01 The Air Shutoff Has Been Improved {1078}
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
C15 Petroleum Generator Set Engines Lubrication System
C15 and C18 Engines for Caterpillar Built Machines Cooling System
C32 Marine Engine Piston and Rings
2003/12/01 A Turbine Type Air Starting Motor Is Now Used on the 3618 Engines {1451}