Fuel Filter Base - Remove and Install
拆卸步骤
- 断开软管组件 (1) 。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
图 1 | g01009668 |
- 断开软管组件 (3) 和软管组件 (2) 。
Show/hide table
图 2 | g01009669 |
- 拆卸螺栓 (4) 。
- 拆卸燃油滤清器底座 (5) 。
安装步骤
- 放置燃油滤清器底座 (5) 。
Show/hide table
图 3 | g01009669 |
- 安装螺栓 (4) 。
- 连接软管组件 (3) 和线束组件 (2) 。
- 连接软管组件 (1) 。
Show/hide table
图 4 | g01009668 |
Caterpillar Information System:
C11 and C13 Engines Rocker Shaft and Pushrod - Install
C11 and C13 Engines Rocker Shaft and Pushrod - Remove
C11 and C13 Engines Electronic Unit Injector - Install
C11 and C13 Engines Electronic Unit Injector - Remove
C11, C13 and C15 On-highway Engines 0283-07 Intake Valve Actuation Oil Pressure not responding (91)
2003/07/01 Quality of Remanufactured Camshafts {1210}
C7 On-highway Engine Electronic Control Module - Remove and Install
C7 On-highway Engine Cylinder Head - Install
C7 On-highway Engine Cylinder Head - Remove
C7 On-highway Engine Turbocharger - Install
C7 Engines for Combat and Tactical Vehicles Engine Oil Level Gauge - Calibrate
C7 On-highway Engine Turbocharger - Remove
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
C4.4 (Mech) Industrial Engine Electrical System
G3520C and G3520E Generator Set Engines Valve Cover - Remove and Install
2003/11/01 New Unit Injector Rocker Arm Is Now Used {1123}
2003/07/21 A New Oversized Oil Pump Idler Gear Shaft is Available for 3054, 3054B, 3056 and 3056E Engines {1234, 1304}
C7 On-highway Engines Turbocharger - Inspect
C11 and C13 Engines Water Pump - Remove
G3520C and G3520E Engines Engine Mount
C15 On-highway Engine Pump Drive - Assemble
C15 On-highway Engine Pump Drive - Disassemble
C15 On-highway Engine Pump Drive - Install