Alternator - Test
Show/hide table
所需工具 | ||
---|---|---|
零件号 | 零件名称 | 数量 |
6V-7070 | 数字万用表 | 1 |
8T-0900 | 电流表 | 1 |
- 通过接通灯或其他负载大约 5 分钟,将蓄电池电压消耗到低于 12.4 V。 起动机器。
- 检查交流发电机电缆的安培数。 这将根据驾驶室中接通的功能而异。 安培数应大约为 20-40 安培。
注: 随着蓄电池电量增加,交流发电机电流输出将减少。
- 检查蓄电池正极接线柱上的电压。 操作 10 分钟后,电压应为 14 V ± 0.5 V。 如果符合技术规格,则交流发电机状况良好。 如果不在 14 V ± 0.5 V 以内,则转至下一步骤,以便在更换交流发电机之前,对整个电路进行故障诊断与排除。
- 检查交流发电机皮带的状况,并检查皮带张力是否符合技术规格。 请参阅机器操作和保养手册,了解正确的皮带张力。 进行任何必要的修理,然后重复步骤 3。
- 检查交流发电机传动皮带轮和交流发电机轴承的状况。 进行任何必要的修理,然后重复步骤 3。
- 检查蓄电池电缆、发动机接地和导线。 根据需要清洁和/或用钢丝刷清理接头。 进行任何必要的修理,然后重复步骤 3。
- 在点火开关处于接通位置时,通过用万用表的正极引线接触导线端子,并用负极引线接触任何机架接地,确认交流发电机上的信号线具有 12 V 电压。 如果不具有大约 12 V 电压,则对从保险丝盒到交流发电机的导线进行故障诊断与排除。 进行任何必要的修理,然后重复步骤 3。
注:交流发电机信号线如下:
- 滑移式装载机、多地形装载机和紧凑型履带式装载机是 123-WH
- 紧凑型轮式装载机是 111-YL
- 小型液压挖掘机是 123-WH
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pressure Switch
2001/10/01 A New Configuration of Valve Springs Is Now In Production {1108}
3054 Engine Flywheel - Inspect
3054 Engine Flywheel Housing - Inspect
Marine Monitoring System II Related Components
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Prelubrication System
3126E and 3126B Commercial and Truck Engines Engine Storage Procedure - Check
3054 Engine Connecting Rod - Inspect
G3516B and G3520B Generator Set Engines Engine Oil Cooler - Install
Marine Monitoring System II Analog Input Module
3054 and 3056 Marine Generator Set Engines Cylinder Liner - Install
3054 and 3056 Marine Generator Set Engines Cylinder Liner - Remove
2000/12/01 A New Boost Pressure Sensor is Available {1917}
365B, 365B Series II and 365BL Excavators Window Washer Reservoir - Fill
3516B Power Package Safety Messages
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Analog Sensor - Calibrate
C-10, C-12, C-15 and C-16 Industrial Engines CAN Data Link Circuit - Test
2000/12/01 A New Coolant Level Sensor is Available {7422}
C-15 and C-16 Industrial Engines Housing (Front)
G3516B and G3520B Generator Set Engines Engine Oil Pump - Remove
Marine Monitoring System II General Information
C-15 and C-16 Industrial Engines Air Inlet and Exhaust System
Installation of the 3406B and 3406C Long Block Engines Installation of the 3406B and 3406C Long Block Engines
C-15 and C-16 Industrial Engines Flywheel