Hydrostatic Drive - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-7505     | Hydraulic Jack     | 1     |
B     | 1U-8846     | Gasket Sealant     |     |
- Use Tooling (A) to support hydrostatic drive (1) and raise the hydrostatic drive (1). Install hydrostatic drive (1) on the front trunnion support. The weight of hydrostatic drive (1) is approximately 50 kg (110 lb).
Show/hide table
Illustration 1 | g00703325 |
Note: Clean the mating surfaces of hydrostatic drive (1) and the front trunnion support. Apply a continuous bead of Tooling (B) to the mounting face of hydrostatic drive (1) .
- Install bolts (3) and the washers to the back of hydrostatic drive (1). Tighten bolts (3) to a torque of 120 ± 20 N·m (90 ± 15 lb ft).
Show/hide table
Illustration 2 | g00499707 |
- Install magnetic plug (2) .
Show/hide table
Illustration 3 | g00499704 |
- Fill hydrostatic drive (1) with oil. Refer to Operations and Maintenance, "Refill Capacities"and Operation and Maintenance, "Lubricant Viscosities" for the proper type and capacity of oil.
End By:
- Install the piston motors. Refer to Disassembly and Assembly, "Piston motor - Install".
- Install the drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and Install".
Caterpillar Information System:
3176C and 3196 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
2000/05/29 Correction to Disassembly and Assembly , "Remove and Install Wheels, Bearings, and Duo-Cone Seals" {4208, 7561}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive - Disassemble
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive - Assemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Oil Cooler (Brake) - Remove
TH62, TH63, TH82 and TH83 Telehandlers Transfer Gear Oil Level - Check
2000/06/12 Improved Routing of the Wire for the Suspension Seat {7324}
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors CID 0100 FMI 13 Engine Oil Pressure calibration required
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 04 Engine Oil Pressure short to ground
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Oscillating Axle (Rear) and Trunnion Support - Remove
3176C and 3196 Engines for Caterpillar Built Machines CID 0174 FMI 04 Fuel Temperature short to ground
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
2000/05/29 Correction to Disassembly and Assembly , "Remove and Install Wheels, Bearings, and Duo-Cone Seals" {4208, 7561}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors CID 0274 FMI 13 Atmospheric Pressure calibration required
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive - Remove
TH62, TH63, TH82 and TH83 Telehandlers Transmission Breather - Clean
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Accumulator (Refrigerant) Remove and Install