TH62, TH63, TH82 and TH83 Telehandlers Caterpillar


Transmission Breather - Clean

Usage:

TH82 3JN


Illustration 1g00712202
Transmission Breather

  • Raise the engine enclosure and remove the breather from the transmission. The breather is located in the transmission housing on the right side of the engine compartment.

  • Wash the breather in clean nonflammable solvent. Wipe the breather dry and check the breather for damage.

  • Install the clean breather back into the transmission. Replace the breather if the breather is damaged.
  • Caterpillar Information System:

    IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive - Remove
    C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors CID 0274 FMI 13 Atmospheric Pressure calibration required
    C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0274 FMI 04 Atmospheric Pressure short to ground
    C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
    C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0273 FMI 04 Turbo Outlet Pressure short to ground
    C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
    C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
    2000/05/29 Correction to Disassembly and Assembly , "Remove and Install Wheels, Bearings, and Duo-Cone Seals" {4208, 7561}
    C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
    3176C and 3196 Engines for Caterpillar Built Machines CID 0174 FMI 04 Fuel Temperature short to ground
    IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic Drive - Install
    3176C and 3196 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
    3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Accumulator (Refrigerant) Remove and Install
    2000/06/19 Correction to Service Magazine, 9EP3441, 31 October 1999 , "New Thrust Washer Improves Service Life of Differential Group" {3258}
    IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Service Brakes - Remove and Install
    2000/05/29 The Required Torque has been Increased for the Piston Retaining Nut in the Lift Cylinder {5102}
    2000/05/29 The Required Torque has been Increased for the Piston Retaining Nut in the Tilt Cylinder {5104}
    2000/06/19 Precleaner Assemblies Are Now Serviceable {1051, 1055}
    TH62, TH63, TH82 and TH83 Telehandlers Transmission Neutralizer Pressure Switch - Adjust
    797 Off-Highway Truck Fan Drive Hydraulic System Suction Fan
    776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Oil Cooler (Brake) - Install
    IT28G Integrated Toolcarrier and 928G Wheel Loader Steering System Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
    3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Refrigerant Condenser - Remove and Install
    D350E Series II and D400E Series II Articulated Trucks Backup Alarm - Test
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.