Screed Plate Leveling
- Check the plates for flatness with a stringline or a straight edge. Add shims or remove shims across the bull nose of the screed. Add shims or remove shims across the leading edge of the main screed plate.
- Check the front of the rear alignment of the extender plates with the main screed. When the rear edge of the extender plate is level with the main screed plate, the front edge of the extender plate should have a 3.175 mm (0.125 inch) gap between the plate and the straight edge. Perform the check 101 mm (4 inch) from the outside edge of the screed plate. Check five points across the entire screed with a level that is 1.2 m (4 ft) long.
- Use the screw adjusters in order to level the rear edge of the screed plate. Turn the screw adjusters clockwise for 1/6 of a turn in order to adjust the screed plate 0.3556 mm (0.014 inch).
In order to lower the plate, turn the adjuster screw clockwise. In order to raise the plate, turn the adjuster screw counterclockwise.
- Repeat step 3.
Caterpillar Information System:
14H Motor Grader Hydraulic System Oil Level - Check
TH103 Telehandler Refill Capacities
2000/04/03 A New Electronic Solenoid Valve Improves the Release of Auxiliary Hydraulic Pressure {5130, 5264, 5479}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Relief Valve (Main) - Test
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Relief Valve (Charge) - Test and Adjust
14H Motor Grader Hydraulic System Oil - Change
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Piston Pump Neutral - Test and Adjust
TH103 Telehandler Lubricant Viscosities
CB-534C Vibratory Compactor Hydraulic System Oil Filter - Replace
120H Motor Grader Hydraulic System Oil - Change
3054 Engine Cooling System - Test
CB-534C Vibratory Compactor Hydraulic System Oil Level - Check
988G Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
988G Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Assemble
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Auger Conveyor
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Piston Motor (Auger Conveyor)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Conveyor Planetary Drive (Auger)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Conveyor Hydraulic System
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Conveyor Systems Piston Pump (Conveyor)
CB-534C Vibratory Compactor Engine Oil Sample - Obtain
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Device Test
3064 and 3066 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
120H Motor Grader Hydraulic System Oil Level - Check
2000/03/27 Procedure to Enter the Correct Password for the Calibration Procedure on the Payload Control System (PCS) {7494}